RockwellAutomation罗克韦尔Gate Scaling Module Mounting Instructions用户手册说明书.pdf

Gate Scaling Module (Part No. Installation Instructions ATTENTION: Only qualified personnel familiar with DC drives and associated machinery should plan or implement the installation, start-up and subsequent maintenance of the system. Failure to comply may result in personal injury and/or equipment damage. ATTENTION: To avoid an electric shock hazard, ensure that all power to the drive has been removed before performing the following. Follow these instructions to properly mount the Gate Scaling Module: • Mount to a flat, grounded, metal panel. • Mount in a suitable enclosure, in a clean, dry location. Contamination from oils, corrosive vapors, and abrasive debris must be kept out of the enclosure. • Mount in a horizontal position only, in order to provide proper cooling. The lettering on the face of the unit should be in a readable position, as shown below. INPUT OUTPUT 60.5 mm (2.38 in.)