Schneider Electric施耐德Installation Guide Smart-UPS RT SURTRKG1 Tower to Rack-Mount Conversion安装和用户指南(英语).pdf

Installation Guide Smart-UPS™ RT SURTRKG1 Tower to Rack-Mount Conversion Important Safety Instructions Read these instructions carefully and look at the equipment to become familiar with the device before trying to install, operate, service or maintain it. The following special messages may appear throughout this document or on the equipment to warn of potential hazards or to call attention to information that clarifies or simplifies a procedure. The addition of this symbol to either a “Danger” or “Warning” product safety label indicates that an electrical hazard exists which will result in personal injury if the instructions are not followed. This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. DANGER DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. NOTICE NOTICE is used to address practices not related to physical injury. Product Handling Guidelines Package Contents Inspect the contents upon receipt. Notify the carrier and dealer if the unit is damaged. One Rail Kit with instructions and hardware for installing Installation manual M5x12 Phillips flat head rails in a rack. screw to secure the rail to the