Schneider Electric施耐德Installation Instruction for 5500PCU C-Bus PC Interface安装和用户指南(英语).pdf

USB PC Interface 5500PCU Installation Instructions 5500PCU C-Bus USB PC Interface Installation Instructions Table of Contents 1.0 Description 3 2.0 Important Notes 3 3.0 Capabilities 3 4.0 Wiring Instructions 4 5.0 C-Bus Network Connection 4 6.0 Status Indicators 6 6.1 Unit/Comms 6 6.2 C-Bus Indicator 6 7.0 C-Bus System Clock 7 8.0 C-Bus Network Burden7 9.0 C-Bus Power Requirements 7 10.0 Power Surges 7 11.0 Megger Testing 8 12.0 Configuration 8 12.1 Driver Installation 8 12.2 C-Bus Programming 8 13.0 Electrical Specifications 8 14.0 Mechanical Specifications 9 15.0 Standards Complied 10 16.0 Warranty 11 17.0 Technical Support and Troubleshooting12 © Copyright Clipsal Australia Pty Ltd 2006. All rights reserved. This material is copyright under Australian and international laws. Except as permitted under the relevant law, no part of this work may be reproduced by any process without prior written permission of and acknowledgement to Clipsal Australia Pty Ltd. Clipsal, C-Bus and Schedule Plus are registered trademarks and HomeGate is a trademark of Clipsal Australia Pty Ltd. The information in this manual is provided in good faith. Whilst Clipsal Australia Pty Ltd (CAPL) has endeavoured to ensure the relevance and accuracy of the information, it assumes no responsibility for any loss incurred as a result of its use. CAPL does not warrant that the information is fit for any particular purpose, nor does it endorse its use in applications which are critical to the health or life of any human being. CAPL reserves the right to