Schneider Electric施耐德Quick Installation Guide - Replacement Battery Cartridge安装和用户指南(英语).pdf

Quick Installation Guide for Replacement Battery Cartridge WA RNING RISK OF FIRE, EXPLOSION OR BURNS • Do not short the battery terminals. • Do not incinerate, crush, disassemble, dispose of in fire, or heat above 85 °C • Do not overcharge or over discharge. • Do not reverse connections (polarity) between charger and battery. • Do not operate beyond published voltage, current, and temperature limits. Failure to follow these instructions can result in death, serious injury or equipment damage. Safety and General Information SAVE THESE INSTRUCTIONS This manual contains important instructions that should be followed during installation and maintenance of the UPS and batteries. Inspect the package contents upon receipt. Notify the carrier and dealer if there is any damages. • Servicing of user replaceable batteries should be performed or supervised by personnel knowledgeable about batteries and required precautions. • When replacing batteries, replace with the same type and number of batteries or battery packs. • Use authorized battery recycler. See for information on recycling services offered in your country. • Turn off all power to the equipment connected before working on battery replacement. Specification Battery Pack RBCV181-LI RBCV182-LI RBCV183-LI SRVSL1KRARK SRVSL2KRARK SRVSL3KRARK Compatible SRVSL1KRIRK SRVSL2KRIRK SRVSL3KRIRK UPS SRVL1KRIRK SRVL2KRIRK SRVL3KRIRK SRVL1KRI-IN SRVL2KRI-IN SRVL3KRI-IN Configuration Internal battery Type Lithium Ion Typical 230.4 Wh 432 Wh 576 Wh capacity Nominal