ASME PTC 19.2-2010 压力测量性能试验规程.pdf

Pressure Measurement Instruments and Apparatus Supplement Performance Test Codes AN AMERICAN NATIONAL STANDARD INTENTIONALLY LEFT BLANK ASME PTC 19.2 2010 Pressure Measurement Instruments and Apparatus Supplement Performance Test Codes AN AMERICAN NATIONAL STANDARD Date of Issuance: October 29, 2010 This Code will be revised when the Society approves the issuance of a new edition. There will be no addenda issued to PTC 19.2-2010. ASME issues written replies to inquiries concerning interpretations of technical aspects of this Code. Periodically certain actions of the ASME PTC Committee may be published as Code Cases. Code Cases and interpretations are published on the ASME Web site 山lder the Committee Pages at http:/ / as they are issued. ASME is the registered trademark of The American Society of Mechanical Engineers. This code or standard was developed under procedures accredited as meeting the criteria for American National Standards. The Standards Committee that approved the code or standard was balanced to assure that individuals from competent and concerned interests have had an opportunity to participate. The proposed code or standard was made a飞railable for public review and comment that provides an opportunity for additional public input from industry, academ日， regulatory agencies, and the public-at-large. ASME does not approve，，，气ate，” or 飞ndorse” any item, construction, proprietary device, or activity. ASME does not take any position with respect to the validity of any p atent rights asserted in con且ection with any items m entioned in 出is document, and does not undertake to insure anyone utilizing a standard against liability for infringement of any applicable letter s patent, nor assumes any such liability. Users of a code or standard a