ZOOM声乐乐器Control the remotely with an iOS device (108.5 KB)说明书用户手册.pdf

By connecting an iOS device to the as a remote control, you can operate it from a distance (up to 10 m) to, for example, start and stop recording, change mixer settings, input metadata text and set the time (by transferring the iOS device time). This function cannot be used with the when first shipped from the factory. To use this function, a software extension file must be downloaded from the ZOOM website (www.zoom.co.jp) and installed in the unit. NOTE • The free ”F8 Control” app is necessary to control the remotely with an iOS device. Download it from the App Store. • Resetting the settings to their defaults (Factory Reset) will disable the extension. In this case install the software extension file again. Installing the software extension file 4. Use to select Yes, 1. Install new batteries in the or connect the and press . dedicated AC adapter to the DC IN connector. NOTE • If the remaining battery charge is low, the software extension cannot be installed. In this case, replace the NOTE batteries with new ones or use an adapter. • Do not turn the power off or remove the SD card during file installation. 2. Copy the software extension file to the root directory on an SD card. 5. After file installation completes, restart the unit. 3. Load the SD card into the SD CARD 1 slot, and turn the power on while pressing and holding until the unit starts and the install