Netgear网件UTM10 – ProSECURE Unified Threat Management (UTM) Appliance Application Note Deploy a ProSecure UTM in a Multi SSID Multi VLAN network说明书用户手册.pdf

UTM (Unified Threat Management) in a multi-SSID multi-VLAN network with traffic separation This document describes the steps to undertake in configuring a UTM 10 (Firmware version 1.0.16-0) and a WNDAP330 (Firmware version 3.0.3) to host a multi-SSID and multi-VLAN network. The solution will allow separating the Wireless traffic and Wired traffic of each of the VLANs configured, from any other VLAN which will exist on the Wired or Wireless LAN – maintaining same VLAN communication. The diagram below shows a typical scenario. UTM 10 Configura