ABS 【2023】RULES FOR BUILDING AND CLASSING SINGLE POINT MOORINGS •单点系泊的建造和分类规则.pdf

Rules for Building and Classing Single Point Moorings January 2023 RULES FOR BUILDING AND CLASSING SINGLE POINT MOORINGS JANUARY 2023 American Bureau of Shipping Incorporated by Act of Legislature of the State of New York 1862 © 2023 American Bureau of Shipping. All rights reserved. ABS Plaza 1701 City Plaza Drive Spring, TX 77389 USA Foreword (2023) This edition of the ABS Rules for Building and Classing Single Point Moorings (SPMs) primarily reflects changes in format and references to ABS and other standards that have occurred since the previous edition was issued. Changes to the technical criteria include revisions made to other pertinent ABS Rules that are the basis of SPM criteria; such as, the introduction of an adjustment factor (Q) to account for higher strength steels in the determination of buoy scantlings. Also the section on Moorings and Anchoring Section (3-4-1, herein) has been updated to reflect industry practice and to specifically allow the option to use the criteria found in the ABS Rules for Building and Classing Floating Production Installations for this topic. The January 2023 edition includes updates to add a new Chapter 5 to Part 4 and a new Chapter 3 to Part 5, to provide the requirements for charging station installation onboard SPMs. In addition, a new optional notation OCC is introduced. PART 1 (1 January 2008) For the 2008 edition, Part 1, Conditions of Classification was consolidated into a generic booklet, entitled Rules for Conditions of Classification – Offshore Units and Structures (Part 1) for all vessels other than those in offshore service. The purpose of this consolidation was to emphasize the common applicability of the classification requirements in Part 1 to ABS-classed vessels, other marine structures a