肯尼亚钢筋标准.pdfVIP

` KENYA STANDARD KS:2712: 2017 Steel for the reinforcement of concrete — Weldable reinforcing steel — Bar, coil and decoiled product — Specification © KEBS 2017 First Edition 2017 ©KEBS 2017 — All rights reserved 1 KS 2712: 2017 TECHNICAL COMMITTEE REPRESENTATION The following organizations were represented on the Technical Committee: 1.Architectural association of Kenya 2.Blue Nile group of companies 3.Brollo Kenya Limited 4.Consumer Information Network 5.Dedan Kimathi University Of Technology\ 6.Devki Steel Mill Ltd 7.Doshi co(H) Ltd 8.Howard Humphreys 9.Insteel Limited 10.Kenya Association of manufacturers 11.Kenya Institute of Research and development 12.Kenya National Accreditation Services 13.Nails and Steel Products 14.National Housing Corporation 15.Palak international limited 16.Steel Makers Ltd 17.Tononoka Steels 18.University of Nairobi 19.Kenya Bureau of Standards — Secretariat REVISION OF KENYA STANDARDS In order to keep abreast of progress in industry, Kenya Standards shall be regularly reviewed. Suggestions for improvements to published standards, addressed to the Managing Director, Kenya Bureau of Standards, are welcome. © Kenya Bureau of Standards, 2016 Copyright. Users are reminded that by virtue of Section 25 of the Copyright Act, Cap. 12 of 2001 of the Laws of Kenya, copyright subsists in all Kenya Standards and except as provided under Section 26 of this Act, no Kenya Standard produced by Kenya Bureau of Standards may be reproduced, stored in a retrieval system in any form or transmitted by any means without prior permission in writing from the Managing D