Barco巴可医疗显示器Barco Displays on non-Barco Display Controllers 技术说明用户手册.pdf

Barco Healthcare September 2021 Barco Displays on non-Barco Display Controllers [ver. 14] Windows 7, Windows 8.1, and Windows 10 Compatibility 1. INTRODUCTION The purpose of this document is to: • Provide a compatibility matrix of tested non-Barco display controllers with Barco displays • Describe Display Communication methods • Provide tested driver versions for use with non-Barco display controllers How to read the compatibility matrix: Tested Compatible at full refresh rate Tested Compatible with certain exceptions Not Compatible 2. MediCal QAWeb COMPATIBILITY Non-Barco cards listed in this document have been tested compatible with all basic QAWeb functionality. It is imperative to connect the display using a USB cable to ensure a reliable data connection between the workstation and display, which is needed for calibration and QA tasks. Barco recommends using the QAWeb Enterprise Online functionality, which is available without additional cost and offers a wide range of capabilities to centrally manage your displays and workstations. More information can be found on /qaweb. The QAWeb Enterprise Agent can be downloaded from within the QAWeb Enterprise Portal after the sign-up process has been completed. The QAWeb Enterprise Agent can alternatively be downloaded from /support/qaweb-enterprise. This is particularly useful when planning to deploy the agent in stand-alone mode and you have no access to the QAWeb Enterprise Portal. 3. NON-BARCO DISPLAY CONTROLLER DRIVERS Due to the large number of potential hardware configurations, Barco does not confirm compatibility of every specific driver available for non-Barco display controllers. However, all display controllers in this document listed as compatible have been validated using drivers openly available from the respective GPU manufacturer’s website. The following is a table of drive