ICL5102 英飞凌芯片 INFINEON 中文版规格书手册.pdfVIP

ICL5102 Data Sheet ICL5102 PFC + Resonant Half- Bridge Controller for LED Drivers 2nd Generation Datasheet Rev1.1 Features  Integrated two stage combination controller allows for reduced number of external components, optimizes Bill of Materials (BOM) and form factor.  PFC controller with Critical Conduction Mode (CrCM) + Discontinuous Conduction Mode (DCM)  Resonant Half-Bridge (HB) controller with fixed or variable switching frequency control  Maximum 500 KHz HB switching frequency and soft-start frequency up to 1.3 MHz  Resonant HB Active Burst Mode (ABM) ensures power limitation and low standby power 300mW.  Supports universal AC input voltage (90 to 305 Vrms) nominal  Excellent system efficiency up to 94%  THD optimization ensures Low harmonic distortion (Total Harmonic Distortion (THD) 5%) down to 30% nominal load.  Integrated High Side MOSFET driver  Small DSO-16 package Comprehensive set of protection features with auto-restart reaction:  Input brown-out protection  PFC bus over-voltage protection  PFC over-current protection  Output over-voltage protection (OVP)  Output over-current/short circuit protection (OCP)  Output over-power/over-load protection (OPP)  Capacitive mode protection  External over-temperature protection (OTP) Potential applications  Offline LED Drivers for commercial and industrial lighting up to 350 W  High density AC/DC power supply Product validation Qualified for industrial applications according to the relevant tests of JEDEC47/20/22 Product Type Package ICL5102 PG-DSO-16 Datasheet Please read the