SMC温控器粒子过滤器组件HRS-PF005(语言 英文)说明书用户手册.pdf

No.HRX-OM-S055-F Caution ・Apply the sealant tape on the NPT side of the nipple 4 turns. Screw in it to the filter 4 turns. ・It must not be screwed in too muchas it ca lead to breakage of the HRS-PF005 filter’s ports and/or leakage. Particle Filter Set 3) Insert the element (2) into the resin filter case (1). Mount the resin filter case by hand tighten. Thermo-chiller Applicable model: HRS Series Read before using Thank you for purchasing SMC’s Thermo-chiller. This particle filter set is a set of parts for installing a particle Caution filter into the piping used in the thermo-chiller HRS series. Read and understand the instructions shown below before ・Mounting of the case should be performed by hand-tighten. When the use. case is tightened excessively by tools or handle, the case might crack or Safety Instructions be damaged. - Safety first, only trained personnel who has knowledge of ・Make sure that the case is held manually by hand when removing and