Autonics奥托尼克斯5相步进电机和驱动器 MD5-HF14说明手册(语言 英语).pdf

-|Transparent Guide|- Micro step 5-phase Stepper Motor Driver • When the signal input voltage is exceeded the rated voltage, connect additional resistance at the outside. Function Setting Timing Chart • Set RUN current within the range of motor’s rated current depending on the load. When the rated motor current is exceeded, the heat may increased and motor may be ■ Function selection DIP switch • The rotation direction is based on facing the shaft, and it is clockwise (CW) when rotating to MD5-HF14 Series damaged. No. Name Function Description the right.