Ibanez依班娜 电吉他 Ibanez Mono-Tune bridge(语言 英文)说明书用户手册.pdf

Ibanez Mono-Tune bridge / Custom string lock A: Intonation adjustment screw E: Ball end holder B: Saddle height adjustment screw (1.5mm hex key wrench) F: String lock C: Tuning knob G: String locking screw (2.0mm hex key wrench) D: Tuning knob cap E N *When tuning, turn only C with your fingers. D is not for tuning. G L I S H B A G C D F E STRING REPLACEMENT Turn the tuning knob(C) counter clockwise until the ball end holder(E) appears. Insert the ball end into the ball end holder(E). Thread the string through the string lock(F) and pull it tightly Tighten the string locking screw(G) using the hex-wrench included. - To prevent damaging the strings when locking them into the Custom String Lock, use the longer portion of the 2.0mm hex wrench to tighten the screws while gripping the shorter portion as shown in the figure. Turn the tuning knob(C) clockwise to tune the string. Notes • Avoi