EPC知识考试(试卷编号222).pdfVIP

EPC知识考试(试卷编号222) 说明：答案和解析在试卷最后 1.[单选题]（）接口是警用接口的信令接口，实现对被控目标的设定、取消和查询等操作。The ( ) interface is a signaling interface with LIC, which is used to realize operations of setting, cancelling and querying the set target. A)X1 B)X2 C)X3 2.[单选题]MPU主备倒换后，需要间隔（）分钟以上，才能再次进行倒换。After switchover of master/slave MPU boards, we need to wait for ( ) minutes at least before switching them again. A)5 B)10 C)15 D)20 3.[单选题]S3接口是MME与（）之间的接口 A)SGSN B)PGW C)SGW D)HSS 4.[单选题]xGW GGSN一般不需要对接的设备是（）。xGW GGSN generally does not need to connect to ( ). A)OCS B)PCRF C)SGSN D)HLR 5.[单选题]MME与HSS之间的接口是（） A)S6a B)Gn/Gp C)S1-U D)S5/S8 6.[单选题]xGW GGSN中，关于CU，说法不正确的是（ ）。In the xGW GGSN, which of the following statements is wrong about the CU? ( ) A)CU固定配置在CSU单板的2号CPU上The CU is fixed on CPU2 of the CSU board. B)一个GGSN网元需要配置两个CU GroupOne GGSN NE needs to be configured with two CU groups. C)CU工作方式是1+1主备The CU works in 1+1 active/standby working mode. D)CU具有话单缓存功能The CU has the CDR caching function. 7.[单选题]SGSN之间路由更新时，SGSN上下文请求消息是哪个网元发送的？（）During inter-SGSN RA update, the SGSN Context request is sent by the following NE: ( ). A)new SGSN B)old SGSN C)MS D)GGSN 8.[单选题]下面说法正确的是（）。Which of the following statements is correct? ( ) A)主用AAA宕机后，PDSN会自动使用备用AAA，当原主用AAA恢复正常，会自动切到原主用AAA。When the master AAA is down, PDSN will automatically switch to the slave AAA; after the original master AAA is recovered to normal, PDSN will automatically switch back to the original master AAA. B)主用AAA宕机后，PDSN要手动切换到备用AAA，当原主用AAA恢复正常，要手动切到原主用AAA。 When the master AAA is down, you need to manually switch the PDSN to the slave AAA; after the original master AAA is recovered, you need to manually switch the PDSN back to the original AAA. C)主用AAA宕机后，PDSN要手动切换到备用AAA，当原主用AAA恢复正常，会自动切到原主用AAA。