EPC知识考试(试卷编号211).pdfVIP

EPC知识考试(试卷编号211) 1.[单选题]重启xGW(PDSN)整框，命令如下（）。To restart the whole shelf of the xGW (PDSN), runs the command ( ). A)PDSN#reload system force B)PDSN#reboot C)PDSN#reset system 答案:A 解析: 2.[单选题]ZXUN xGW-16机框中，总共有（ ）个业务槽位可用于插入GSU/CSU/PFU单板。On the ZXUN xGW-16 shelf, altogether ( ) service slots can be installed with GSU/CSU/PFU boards. A)8 B)13 C)16 D)22 答案:C 解析: 3.[单选题]EMS上实现xGW GGSN信令跟踪功能，必须在xGW上增加一个（）用户。To enable the xGW GGSN signaling trace function in the EMS, we must add a ( ) account in the GGSN. A)ems-user B)xgw-user C)zte D)admin 答案:B 解析: 4.[单选题]在GGSN系统割接前，需要检查单板内存，在GGSN中查看内存状态的命令是（）。Before GGSN system cutover, we need to check board memory. To check the memory status in the GGSN, run the command ( ). A)show memory B)show host C)show processor D)show hardware 答案:C 解析: 5.[单选题]在设置Application资源时，设置StartProgram属性为（）。While setting the Application resource, we should set the attribute of StartProgram to ( ). A)/home/omc/zxhome/omcboot/omcstop B)/home/omc/zxhome/omcboot/omcclean C)/home/omc/zxhome/omcboot/omcstart D)/home/omc/zxhome/omcboot/omcmon.vcs 答案:C 解析: 6.[单选题]GGSN对接PCRF的接口（）。The interface for the GGSN to interconnect with the PCRF is ( ). A)Gs B)Go C)Gx D)Gy 答案:C 解析: 7.[单选题]MME与Enodeb对接时需要配置： A)静态偶联 B)动态偶联 C)gtp-c D)gtp-u 答案:B 解析: 8.[单选题]xGW（PDSN）配置的ACL数目，不超过（）警戒线。The number of ACLs configured on the xGW (PDSN) can not exceed the threshold of (). A)1000 B)2000 C)3000 D)4000 答案:D 解析: 9.[单选题]DPI规则管理中，GUI界面无法打开可能原因可能是（）。In DPI rule management, if the GUI window fails to open, what is the possible cause? ( ) A)配置了中文的规则别名configured with Chinese rules alias B)配置了英文的规则别名configured with Rules of the English alias C)rulesi相同configured same rulesi D)apn名称相同导致的configured same APN 答案:A 解析: 10.[单选题]服务RNC重定位过程在（）状态执行。The serving RNC reloc