FLUKE Calibration福禄克计量校准9170 系列高精度计量炉 917x Technical Guide Supplement (178.56 KB)说明书用户手册.pdf

Manual Supplement Manual Title: 917X Series Technical Guide Supplement Issue: 3 Print Date: 2005 Issue Date: 8/20 Revision/Date: 1, 3/11 Page Count: 1 This supplement contains information necessary to ensure the accuracy of the above manual. This manual is distributed as an electronic manual on the following CD-ROM: CD Title: 917X Series CD Rev. Date: 2008 CD PN:. 3750704 © 2011-2020 Fluke Corporation. All rights reserved. 917X Series Technical Guide Manual Supplement Change #1, 548 On page 10, under the Specifications table, replace the Computer Interface with: Computer Interface RS-232 On page 13, under 3.1 Unpacking, delete: 9170 the 11th bullet. 9171 the 11th bullet. On page 14, under 3.1 Unpacking, delete: 9172 the 10th bullet 9173 the 10th bullet Change #2, 559 On page 104, under the Note, change: From: TREF – TSPT = Offset To: TSPT – TREF = Offset Change #3, 91 On page 24, under the 4.5 Accessories section, change these bullets: From: • 9170-INSC, Insert, C, 9170, four 0.25 inch holes • 9171-INSC, Insert, C, 9171, four 0.25 inch holes • 9172-INSC, Insert, C, 9172, four 0.25 inch holes • 9173-INSC, Insert, C, 9173, four 0.25 inch holes To: • 9170-INSC, Insert, C, 9170, six 0.25 inch holes • 9171-INSC, Insert, C, 9171, six 0.25 inch holes • 9172-INSC, Insert, C, 9172, six 0.25 inch holes • 9173-INSC, Insert, C, 9