气 焊 Gas-Welding 气 焊 气 焊.pptVIP

Gas Welding (Oxy-acetylene)A number of welding processes use a flame produced by burning a mixture of fuel gas and oxygen. The gas usually used is Acetylene but other gases are also used. Separate cylinders and a hose pipe from each cylinder transports the gases to a torch. Gas and fuel mix in the torchburns @ 3100°C. Gas Welding During the welding, heat from the flame is concentrated on the joint edges until the metal melts and starts to flow. When the molten metal from both sides melts it starts to fuse, when the metal cools down the two parts become Permanently joined Additional Fill