simrad eecdis type special training course4ecdis类型特定培训第1章基本要求电子海图显示与.pdf

Basic ECDIS requirements • An ECDIS system is allowed to operate optionally by using non-approved charts. The operation is however limited to only be used for those areas where approved charts not are available • When non-approved charts are used the ECDIS must be used together with an appropriate folio of up-to date paper charts! • When not using an official chart, this will be indicated with alarm text in the Attention window Basic ECDIS requirements Installation approval: When all units are installed, external equipment connected and the software configured according to the previous sections, the installation should be verified according to the check lists listed in the Installation Electronic charts and carriage requirements • All ships irrespective of size shall have: – Nautical charts an utical publications to n and dis y the ship’s route for the intended voyage and to plot and monitor positions throughout the voyage – An Electronic Chart Dis y and Information System (ECDIS) may be accepted as meeting the chart carriage requirements – Back-up arrangements to meet the functional requirements if this function is partly or fully fulfilled by electronic means SOLAS V/19 Electronic charts and carriage requirements • There are two types of electronic chart – Vector (VNC) – Raster (RNC) ❖ A raster chart is a scanned and passive image of a paper chart, whereas a vector chart corresponds to a digital objects that can be dis yed in layers such as; points, lines, areas etc. – Note! Simrad E5024 will not accept RNCs • Official charts are issued on the authority of a ernment by an authorized Hydrographic Office or other relevant ernment institution • All other nautical charts are by definition not official and are often referred to as private charts. These charts are not