气压砂轮光整加工材料去除控制方法研究的中期报告.docxVIP

气压砂轮光整加工材料去除控制方法研究的中期报告 摘要： 气压砂轮光整加工是一种高效的表面加工方法，其中对材料的去除和加工精度控制非常关键。本报告通过文献综述和实验研究，研究了气压砂轮光整加工材料去除控制方法的中期进展。主要内容包括气压砂轮光整加工原理、材料去除机理、加工参数对材料去除的影响、控制方法及其优化，以及未来需要解决的问题和挑战。研究结果表明，通过合理的加工参数参数和控制方法可以实现较高精度的材料去除，未来还需要对加工过程中的热效应、材料微观结构、表面质量等方面进行更深入的研究。 关键词：气压砂轮光整加工、材料去除、加工精度、控制方法、优化 Abstract: The pneumatic grinding and polishing process is an efficient surface processing method, in which the removal of materials and the control of processing accuracy are crucial. This report studies the mid-term progress of the control method of removing materials in pneumatic grinding and polishing process through literature review and experimental research. The main contents include the principle of pneumatic grinding and polishing process, the mechanism of material removal, the influence of processing parameters on material removal, control methods and their optimization, and the problems and challenges that need to be solved in the future. The results show that higher precision material removal can be achieved through reasonable processing parameters and control methods, and further research needs to be done on the thermal effect, material microstructure, surface quality, and other aspects during the processing. Keywords: pneumatic grinding and polishing, material removal, processing accuracy, control method, optimization.