埋地GRP管施工措施(中英)2.docxVIP

Method statement for GRP pipe installation Method statement for GRP pipe installation 埋地 GRP 管施工措施 Plant: PP+HDPE contractor: TCM Client: CSPC Subcontractor: CP6CC 编号 Ref.No: NH- HDPE+PP- WPR-210 REV：B Page 1 of 13 CONTENTS 目录 Scope 范围 References And Applicable Codes 参考文件 Method statement 施工措施 Construction Quality Records And Inspection Reports 施工质量记录和检查报告 Revision Note 修订注释 Appendix Joint Lubricant Requirements 附录 涂抹接头润滑油用量 Method statement for GRP pipe installation Method statement for GRP pipe installation 埋地 GRP 管施工措施 Plant: PP+HDPE contractor: TCM Client: CSPC Subcontractor: CP6CC 编号 Ref.No: NH- HDPE+PP- WPR-210 REV：B Page 2 of 13 Scope 范围 This procedure shall apply to excavating, back-filling, material handling Storage, transportation, installation, pressure testing and flushing of GRP pipe in Nanhai HDPE/PP plant. 本程序适用于南海石化项目 PP+HDPE 装置 GRP 管道的管沟开挖回填、管材现场装卸保管倒运、安装、试验、冲洗的施工。 References And Applicable Codes 参考文件 NH-HDPE+PP-QCPR-322 Procedure for Dimensional Control 尺寸控制程序 NH-HDPE+PP-WPR-211 Procedure for Hydrostatic Testing and Flushing of Piping 管道水压试验及冲洗程序 NH-HDPE+PP-WPR-206 Procedure For Excavation Backfilling 土方开挖及回填施工程序 NH- HDPE+PP-PR-242 Method statement in rainy season 雨季施工措施 SP-8310-0000-0026 Materials workmanship specification permanent UG work 地下施工材料及技术要求 Code for construction and acceptance of water supply and sewerage pipelines. GB 50268 –97 给水排水管道工程施工及验收规范 Guide of Specifications for Installation of Underground GRP Pipe LZF-0623-01-03 地下GRP管安装手册 测量放线、管沟开挖 Setting-out and Trench excavation General requirements for setting-out and trench excavation refer to NH-HDPE+PP-WPR-206 Procedure For Excavation Backfilling. The trench figure as follow:测量放线、管沟开挖一般施工要求见NH-HDPE+PP-WPR-206土方开挖及回填施工程序，管沟图如下： Method statement for GRP pipe installation Method statement for GRP pipe installation 埋地 GRP 管施工措施 Plant: PP+HDPE contractor: TCM Client: CSPC Subcontractor: CP6CC 编号 Ref.No: NH- HDPE+PP- WPR-210 REV：B Page 3 of 13 Figure 4.2 Figure 4.2 Trench Dimension “A”