ABB Connector replacement guide, fan for ACS880-104 R8i, ACS880-304 D8T, BLCL-2…, BL-2… and BLHF with DOL fan +C188 说明(英语)用户手册.pdf

Connector replacement guide Fan cable for ACS880-104 R8i with +C188, ACS880-304 D8T with +C188, or BLCL-2…, BL-2… and BLHF with +C188 The document is applicable to the fans of these converter and filter modules: – ACS880-104 frame size R8i with DOL fan +C188 – ACS880-304 +A018 frame size D8T with DOL fan +C188 – BLCL-2…, BL-2… and BLHF with DOL fan +C188. Option +V112 indicates that the converter or filter module is equipped with black auxiliary power supply connector and fan kit connectors (= new connector design). Before you start replacing the fan to the fan kit or assembly, make sure that the connector on the frame of the fan assembly (X58) is compatible with the counterpart at the end of the fan cable. Black connector is compatible only with the black counterpart, and gray connector only with the gray coun- terpart. If the connectors are not compatible, replace the connector at the end of the fan cable. Use the con- nector from the old fan, or order suitable connector from ABB. Make sure that the wire connections to the connector remain unchanged. Do not mix the order. Ter- minal numbers are also marked in the wires. Wire colors are matched for male-female connector pairs. For all connectors, use a 0.6 × 3.5 mm slot-head screwdriver, and max. 0.6 N·m tightening torque. New connectors can be ordered from ABB Service with these order codes. ABB order code ABB order code Connector type Description (New type) (Old type) 9-pin female Module side 3AXD50000960248 3AUA0000059813 9-pin male connector Fan side 3AXD50000960309 3AUA0000059812 Location of X58 in R8i/D8T modules Location of X58 in filter modules 3AXD50001059903 Rev A 2023-05-10 © Copyrigh