EN-12164-eng规范及标准文件.pdf

DEUTSCHE NORM September 2000 Copper and copper alloys – Rod for free machining purposes (includes Amendment A1 : 2000) EN 12164 English version of DIN EN 12164 : 1998 + A1 : 2000 ICS 77.150.30 Supersedes April 1998 edition. Kupfer und Kupferlegierungen – Stangen für die spanende Bearbeitung (enthält Änderung A1 : 2000) European Standard EN 12164 : 1998 + Amendment A1 : 2000 has the status of a DIN Standard. A comma is used as the decimal marker. National foreword This standard has been prepared by CEN/TC 133. The responsible German body involved in its preparation was the Normenausschuss Nichteisenmetalle (Nonferrous Metals Standards Committee), Technical Committee Stangen, Drähte und Profile . Amendments This standard differs from the April 1998 edition in that it has been editorially revised and alloys CuZn39Pb2Sn and CuZn40Pb2 have been dropped. Previous editions DIN 1714: 1936-02; DIN 1756: 1925-07, 1933-12, 1943-03, 1963-07, 1969-07; DIN 1758: 1925-07, 1933-12, 1941-09; DIN 1761: 1925-07, 1939-12, 1963-07, 1969-07; DIN 1763: 1925-07, 1941-09, 1963-07, 1969-07; DIN 1767: 1925-07, 1954-06; DIN 1773: 1927-07; DIN 1776: 1929-12, 1936-01, 1939-01, 1941-07; DIN 1782: 1929-12, 1935-01, 1963-07, 1969-07; DIN 17672-1: 1957-04, 1961-08, 1969-02, 1974-06, 1983-12; DIN 17672-2: 1961-08, 1969-06, 1974-06; DIN EN 12164: 1998-04. Continued on pages 2 and 3.