大型筒节车削加工过程视觉监测系统的研发的中期报告.docxVIP

大型筒节车削加工过程视觉监测系统的研发的中期报告 摘要： 本中期报告介绍了大型筒节车削加工过程视觉监测系统的研发进展，包括系统架构设计、图像采集与处理、算法优化以及实验验证等方面。经过前期研究，已经搭建了基于嵌入式硬件平台的视觉监测系统，并对系统进行了初步实验验证。本阶段的工作主要集中在优化系统算法，进一步提高系统的稳定性和准确性。其中，针对拍摄图像质量不佳的问题，采用了预处理算法来提高采集到的图像质量；同时，对算法中常见的误差进行了量化和分析，并通过调整算法参数和优化算法结构来减小误差。实验结果表明，系统性能得到了有效提升，可以满足大型筒节车削加工过程实时监测的需求。 关键词：视觉监测；大型筒节；车削加工；图像处理；算法优化；实验验证 Abstract: This midterm report introduces the research progress of the visual monitoring system for large-scale cylinder turning processing, including system architecture design, image acquisition and processing, algorithm optimization, and experimental verification. After the previous research, a visual monitoring system based on an embedded hardware platform has been built, and the system has been preliminarily experimentally verified. The work of this stage mainly focuses on optimizing system algorithms to further improve system stability and accuracy. To solve the problem of poor image quality, a preprocessing algorithm is adopted to improve the quality of the collected images. At the same time, common errors in the algorithm are quantified and analyzed, and the algorithm is adjusted and optimized to reduce the error. The experimental results show that the system performance has been effectively improved and can meet the needs of real-time monitoring of large-scale cylinder turning processing. Keywords: visual monitoring; large-scale cylinder; turning processing; image processing; algorithm optimization; experimental verification