谦胜控制器使用说明书.pdf

CS-A04 VERSION : 1.0 Language ：English CHIAN SAN Electronic al CO., LTD. 臺 灣 新 北 市 新 莊 區 福 營 路 2 3 0 號 No.230, Fuying Rd., Xinzhuang Dist., New Taipei City 242, Taiwan Tel: +886-02 Fax: +886-02 h t t p : / / w w w . c h i a n s a n . c o m . t w Contents Points for attention 1 SPECIFICATION2 Dimension drawing (unit:mm)3 Description of the terminals 4 Description of the parameter 6 Table 1.1 Description of the Parameters 6 Table 1.2 Remarks of the Parameters 7 Operating Instructions 8 The main frame ：8 Screen displayed for the parameter change ：9 MODE 1: The ratio adjustment screen of the four group output 9 MODE 2: Screen of four group original 0 status adjustment 10 MODE 3: External ratio fine range adjustment screen 11 MODE 4: Series/parallel relationship adjustment screen for each group 12 MODE 5: Internal/external input mode 13 MODE 6: Acc./Dec. time adjustment screen 14 The date of the program version display ( frame ) 14 CHIANSAN CS-A04 Points for attention  Wiring work is not allowed, or removing/or fixing A04 terminal is not allowed either when the circuit is active.  IN+ and IN- is the contact for external signal input.  Removing the shell is not allowed and pressure test of the controller parts is not allowed either.  All of the following for internal input: COM for common contacts, ADD for acceleration, DEC for deceleration, D-S for deceleration to 0 and STOP for emergency.  The action order in priority is STOP D-S DEC ADD  DA1+/DA1-~DA4+/DA4- are the four groups of output contacts.  +V 、VR1 ~ VR4 、-V are the four groups of