在线粒检测演示文稿.pptVIP

不同样品数据比较 最多八个数据同时比较 以瞬间值或过程平均值比较 显示类型 累积量 百分比 矫正的散射 背景 暗背景 使用文件名或者标签名加以区分 当前第30页\共有38页\编于星期二\5点 Malvern Link SCADA 用户界面 Intellution Ifix 手动模式 简单系统操作界面 开始/停止测量 产品规格选择 计划维护 自动模式 OPC,Modbus, 模拟量 过程变量传输 自动维护 采样控制 批量控制 研磨及分级控制 当前第31页\共有38页\编于星期二\5点 Malvern Link 界面 主界面 快速结果窗口 信息 菜单 状态 界面有5块不同部分组成 当前第32页\共有38页\编于星期二\5点 菜单定义 快捷键 (键盘F1-F12) 帮助 子菜单控制 Malvern Link ( 测量, 背景 ) 子菜单浏览结果 子菜单配置 Malvern Link 子菜单调用RTSizer 子菜单浏览报警 登陆 注销 退出程序 当前第33页\共有38页\编于星期二\5点 发 射 器 样品 池 接 收 器 当前第34页\共有38页\编于星期二\5点 当前第35页\共有38页\编于星期二\5点 当前第36页\共有38页\编于星期二\5点 当前第37页\共有38页\编于星期二\5点 当前第38页\共有38页\编于星期二\5点 * Read slide * * 谁需要Insitec在线粒度分析仪？ 基本而言，包括产品粒度范围在0.1um至1000um之间的所有粉体产品制造商 * * This slide depicts a typical on-line setup. Ventury effect created by air pressure to the Eductor aspirates the material through the sampling probe and into the Eductor. The Eductor propels the dispersed powder, laser beam passes through the material and scattered light is picked by the detector. The material continues to flow through the outlet and back into the line. * The only frightening part is how to get the samples and any Customisation * * Sampling components can be considered next. The components are identified here for those not familiar with the bypass configuration. It is important to note that the actual configuration is very rarely repeated. Every application will have unique requirements in terms of product properties, flow characteristics, sampling position, etc. The configuration will have been carefully considered by the process specialist in collaboration with the customer. As part of the project the Malvern UK Process Engineering team will then generate configuration drawings for the application. In some projects we have used fluid dynamics software to predict flow characteristics and therefore optimise sampling. Sampling components: Process Line – Varying pipe diameters 12.5mm to 2m, Spool Piece concept if possible Weld Stubs – Need to be installed before Malvern Engineer can install s