bufgmux ctrl原语2对1全局时钟缓冲器.pdfVIP

BUFGMUX_CTRL BUFGMUX_CTRL Primitive: 2-to-1 Global Clock MUX Buffer The BUFGMUX_CTRL is a global clock buffer with two clock inputs, one clock output, and a select line used to cleanly select between one of two clocks driving the I0 O global clocking resource. This component is based on BUFGCTRL, with some pins I1 connected to logic High or Low. This element uses the S pin as the select pin for the 2- S to-1 MUX. S can switch anytime without causing a glitch on the output clock of the buffer. X10478 Usage The BUFGMUX_CTRL component generally needs to be instantiated in order to orporate it into a design. The I0 and I1 inputs should be connected to the proper clock sources, the S pin to the logic in which will make the selection, and the O pin to the clock inputs of all synchronous elements to be clocked by the selected source. Pin Descriptions Signal Name Direction Size Function O Output 1-bit Clock output I0 Input 1-bit One of two clock inputs I1 Input 1-bit One of two clock inputs S Input 1-bit Select for I0 (S=0) or I1 (S=1) clock output For More Information Consult the Virtex-5 User Guide. Virtex-5 Libraries Guide fo