(8361)--磷酸镁水泥基材料薄层修补结构抗冲击性能研究.pdfVIP

(8361)--磷酸镁水泥基材料薄层修补结构抗冲击性能研究.pdf

  1. 1、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。。
  2. 2、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  3. 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
  4. 4、该文档为VIP文档,如果想要下载,成为VIP会员后,下载免费。
  5. 5、成为VIP后,下载本文档将扣除1次下载权益。下载后,不支持退款、换文档。如有疑问请联系我们
  6. 6、成为VIP后,您将拥有八大权益,权益包括:VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
  7. 7、VIP文档为合作方或网友上传,每下载1次, 网站将根据用户上传文档的质量评分、类型等,对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
全国中文核心期刊 中国科技核心期刊 磷酸镁水泥基材料薄层修补结构 抗冲击性能研究 摘要:采用磷酸镁水泥基修补材料(MPC 修补材料)作为薄层修补结构的面层材料,强度等级为 C50 的混凝土作为基层混凝土 , 研究了 MPC 修补材料的修补层厚度、基层混凝土 的界面粗糙度、钢纤维掺量 以及盐冻条件对薄层修补结构抗冲击性能的影响。结果 表明 :随着修补层厚度 以及基层混凝土界面粗糙度 的增加,薄层修补结构的抗冲击性能提高 ;随着钢纤维掺量 的增加,薄层修补结构 的抗冲击性能提高 ,1、2、3、4 、5 cm 修补层厚度 的钢纤维最佳掺量分别为 0.4% 、0.6% 、0.8% 、1.0%和 1.0%,抗冲击性能较无钢纤维 的 薄层修补结构分别提高 了 125.6%、123.2%、121.8%、147.2%和 144.2%;90 次盐冻循环后,1、2、3、4 、5 cm 修补层厚度 的薄层修补结构 抗冲击性能较非盐冻条件下分别降低 了 75.6% 、52.0%、32.7%、33.3%和 28.2% 。 磷酸镁水泥基修补材料;薄层修补结构;修补层厚度 ;界面粗糙度 ;盐冻循环 关键词: 中图分类号:TU526 文献标识码:A 文章编号:1001-702X (2020)06-0026-04 Research on impact resistance of magnesium phosphate cement-based thin layer repaired structure LI Ying (Tongliao Municipal Engineering Office ,Tongliao 028000 ,China) Using magnesium phosphate cement-based (MPC)repair material as the surface material of thin layer repair structure , Abstract : and the C50 concrete as the base concrete ,studied the influence of repair thickness ,base concretes interface roughness ,steel fiber content and salt freezing conditions on the impact resistance of thin layer repair structure. The results show that ,with the increase of the repairing thickness and surface roughness of the base concrete ,the impact resistance of the thin-layer repairing structure improves. With the increase of the content of steel fiber ,the impact resistance of the thin-layer repaired structure improves. When the optimal content of steel fiber is added ,the optimal content of steel fiber of the 1~5 cm thin-layer repaired structure is 0.4% ,0.6%

文档评论(0)

职教中心 + 关注
实名认证
文档贡献者

学高为师,身正为范!

1亿VIP精品文档

相关文档