(8244)--硅灰对透水水泥混凝土路面强度影响的研究.pdfVIP

(8244)--硅灰对透水水泥混凝土路面强度影响的研究.pdf

  1. 1、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。。
  2. 2、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  3. 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
  4. 4、该文档为VIP文档,如果想要下载,成为VIP会员后,下载免费。
  5. 5、成为VIP后,下载本文档将扣除1次下载权益。下载后,不支持退款、换文档。如有疑问请联系我们
  6. 6、成为VIP后,您将拥有八大权益,权益包括:VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
  7. 7、VIP文档为合作方或网友上传,每下载1次, 网站将根据用户上传文档的质量评分、类型等,对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
硅灰对透水水泥混凝土路面强度影响的研究 摘 要 :为改善透水路面水泥混凝土的强度,发挥活性剂在混凝土中的最大效用 ,在水泥和集料中添加 不同掺量的硅灰,并通过室内试验得出混凝土的力学性能﹒试验结果表明 ,当混合料中硅灰含量6%时,混 凝土的抗压强度和抗折强度与硅灰含量正相关 ,且掺量在3%至5%范围内时,混凝土强度增幅较为显著;当 硅灰含量 6%时,强度随之降低;硅粉含量为6%左右时混凝土的7和28 d抗压强度最大值分别为22.3和26.4 MPa ,7 d抗折强度最大值为2.57 MPa ;新拌透水路面混凝土中添加5%的硅灰和3%具有保水增粘作用的专用 减水剂(含 10%羟丙基甲基纤维素醚(HPMC))时,透水效果较好﹒ 关键词 :透水路面;硅灰 ;抗压强度;减水剂 中图分类号:U416.2 文献标识码 :A doi:10.3969/j.issn.1672-7304.2021.06.0004 文章编号 :1672–7304(2021)06–0017–05 Research on the influence of silica fume on the strength of permeable cement concrete pavement 1 2 LI Shanghui ,FU Yingchun (1. Institute of Technology, Fuzhou University of Foreign International Studies and Trades, Fuzhou, Fujian 350202, China; 2. CCCC First Highway Xiamen Engineering Co., Ltd., Xiamen, Fujian 361021, China) Abstract: In order to improve the strength of permeable pavement cement concrete and give full play to the maximum effect of surfactant in concrete, different amounts of silica fume are added to cement and aggregate, and the mechanical properties of concrete are obtained through laboratory tests. The test results show that when the content of silica fume in the mixture is less than 6%, the compressive strength and flexural strength of concrete are positively correlated with the content of silica fume, and the strength of concrete increases significantly when the content of silica fume is in the range of 3% to 5%. When the silica fume content is more than 6%, the strength decreases accordingly. When the content of silica fume is about 6%, the maximum 7 and 28 d compressive strength of concrete are 22.3 and 26.4 MPa, respectively, and the maximum 7 d flexural strengt

您可能关注的文档

文档评论(0)

职教中心 + 关注
实名认证
文档贡献者

学高为师,身正为范!

1亿VIP精品文档

相关文档