工业纯钛TA2电站冷凝管激光焊接技术研究的中期报告.docxVIP

工业纯钛TA2电站冷凝管激光焊接技术研究的中期报告 摘要： 随着能源需求的不断增长，电站冷凝管在电力行业中发挥着至关重要的作用。工业纯钛TA2由于其具有高强度、高抗腐蚀性等优异的性能，成为了电站冷凝管制造的重要材料。然而，传统的冷凝管连接技术通常存在着易腐蚀、易漏气、接口质量差等问题，不符合电站冷凝管的使用需求。因此，本研究采用激光焊接技术，对工业纯钛TA2电站冷凝管进行焊接连接。 本报告主要介绍了研究中期的实验研究情况，并对焊接工艺参数进行了优化。通过SEM和XRD等分析手段对焊缝进行了表征，研究结果表明，焊接接头处组织显微结构均匀致密，焊缝夹杂物数量较少，界面尺寸细小，焊接质量较好。 关键词：工业纯钛TA2，电站冷凝管，激光焊接，焊接工艺参数，焊缝表征 Abstract: With the increasing demand for energy, condenser tubes play a critical role in the power industry. Industrial pure titanium (TA2), which has excellent properties such as high strength and corrosion resistance, is an important material for the manufacture of condenser tubes in power plants. However, traditional connection technologies for condenser tubes often suffer from problems such as corrosion, gas leakage, and poor interface quality, which do not meet the needs of condenser tubes in power plants. Therefore, in this study, laser welding technology was used to weld and connect industrial pure titanium TA2 condenser tubes. This report mainly introduces the experimental research in the middle stage of the study and optimizes the welding process parameters. The welds were characterized by SEM and XRD, and the results showed that the microstructure at the welding joint was uniform and dense, the number of inclusions in the weld was small, the interface size was small, and the welding quality was good. Keywords: industrial pure titanium TA2, condenser tube, laser welding, welding process parameters, weld characterization.