某垃圾填埋场渗滤液处理工程初步设计--毕业论文.docxVIP

理工学院毕业设计 某垃圾填埋场渗滤液处理工程初步设计 摘要：本设计针对400t/d的垃圾填埋场渗滤液的处理工艺进行设计。渗滤液废水水质复杂，属于典型的高浓度难降解有机污染废水，其水质特点表现为有机物含量高、COD、BOD高、pH低等特点。设计采用“吹脱→与ABR→SBR→活性炭吸附深度处理”工艺对垃圾填埋场渗滤液进行处理。废水水质 COD BOD SS NH3-N 9000mg/L 3600mg/L 1200mg/L 1500mg/L 渗滤液经本工艺处理后，COD、BOD、NH3-N及SS的去除率分别为98.9%、99.2%、98.4%及97.5%，满足《生活垃圾填埋场污染控制标准》（GB16889-2008）一级排放标准。 关键词：渗滤液；吹脱；ABR；SBR；活性炭吸附  Design of Municipal Solid Waste Landfill Leachate Treatment Process Abstract: Design of 400m3/d of municipal solid waste landfill leachate treatment process was proposed. Leachate with complex substances was typical and difficultly degraded efflu