蚊香固定支架级进模设计.docVIP

PAGE PAGE 14 蚊香固定支架级进模设计 【摘要】 本次设计了一套切口、落料的模具.经过查阅资料,首先要对零件进行工艺分析,经过工艺分析和对比,采用切口落料工序,通过冲裁力、顶件力、卸料力等计算,确定压力机的型号。再分析对冲压件加工的模具适用类型选择所需设计的模具。得出将设计的模具类型后将模具的各工作零件设计过程表达出来。 在文档中第一部分，主要叙述了冲压模具的发展状况，当前冲压模具技术发展呈现的特点说明了冲压模具的重要性与本次设计的意义，接着是对冲压件的工艺分析，完成了工艺反感的确定。第二部分，对零件排样图的设计，完成了材料利用率的计算。再进行冲裁模工作部分的设计计算，对选择冲压设备提供依据。最后对主要零部件的设计和标准件的选择，为本次设计模具的绘制和模具的成形提供依据，以及为装配图个尺寸提供依据。通过前面的设计方案画出了模具的装配图，各零件图和产品图。 关键词：蚊香固定架、切口模、冲裁模、落料模、冲压加工 Abstract:The design of a set of incisions, blanking die. Through access to information, we must first parts with process analysis, process analysis and comparison through the use of incision blanking process, through the blanking force, the top pieces of force, discharge power, etc. calculations to determine the press models. Re-analysis of the stamping process to select the desired type of mold for the design of the mold. Obtained after the design of the mold type of mold design process in various working parts express. In the first part of the document, the main description of the development of stamping die, stamping die present showed the characteristics of technological development shows the importance of stamping dies and the significance of this design, then is the stamping process analysis, completed the process aversion determination. The second part, the part layout diagram design, complete material utilization calculations. Further the work of stamping die part of the design calculations, provide a basis for the selection of stamping equipment. Finally, the main parts of the design and selection of standard parts, mold-based sub-design rendering and provide a basis for forming molds, as well as assembly drawings provide the basis for one size. Key words: mosquito fixation、cut die、blanking die、 blanking die、 stamping process 目录 TOC \o 1-3 \h \z \u 1 引言 4 1.1 冲压模具发展的现状 4 1.1.1 工艺分析计算方法现代化 4 1.1.2 模具设计制造技术现代化 4 1.1.3 冲压生产机械化与自动化 5 1.1.4 不断改进板料的冲压性能 5 1.2 冲压模在生活中的地位 5 1.3 当前冲压模具技术发展特点 5 1.3.1充分运用IT技术发展模具设计、制造