电场法水中除砷机理及不同材料除砷效率研究的中期报告.docxVIP

电场法水中除砷机理及不同材料除砷效率研究的中期报告 Abstract: In this study, the mechanism of arsenic removal from water using electric field method was investigated. The efficiency of arsenic removal using different materials was studied. The results showed that the electric field method can effectively remove arsenic from water. The removal efficiency was influenced by the applied voltage, electrode distance, and material properties. The electric field method using different materials showed different levels of efficiency in arsenic removal, with activated carbon showing the highest efficiency. Further studies are required to fully understand the mechanism of arsenic removal using electrophoresis and to optimize the process parameters. Introduction: Arsenic is a toxic element that is naturally present in groundwater. Chronic exposure to arsenic can cause skin lesions, cancer, and other health problems. Many areas around the world are affected by arsenic contamination in water. Therefore, effective methods for removing arsenic from water are urgently needed. The electric field method is a promising technique for removing arsenic from water. The method is based on the electrophoretic migration of charged particles in an electric field. When an electric field is applied, arsenic ions are attracted to the charged electrodes and migrate towards them, where they can be removed. In this study, we investigated the mechanism of arsenic removal from water using the electric field method. We also studied the efficiency of arsenic removal using different materials. Methodology: In this study, we used a laboratory-scale reactor to investigate the efficiency of arsenic removal using electric field method. The reactor consisted of two electrodes (anode and cathode) placed at a fixed distance in a container filled with water. The applied voltage was varied from 1 to 10 V, and the electrode distance was varied from 1 to 5 cm. Several materials, including activated carbon, alumina, silica gel, and zeolite,