化工园区有害气体浓度监测系统设计.pdfVIP

仪器仪表与检测技术 《自动化技术与应用》 2019年第38卷第10期 Instrumentation and Measurment 化工园区有害气体浓度监测系统设计* 付瑞玲 ,夏凯林 ,王银玲 （黄河科技学院，河南 郑州 450063） 摘 要:化工园区含有CO、SO 等有害气体，是化工园区重要的危害源，有害气体浓度过高时会导致重大安全事故，危及人身安全。 2 对化工园区有害气体浓度监测仪表的研究和开发也一直是广大人民关注的问题。本系统研究的是以AT89C51单片机为控 制核心，利用气体传感器MQ-7和MQ-135、ADC0809模数转换器、传输模块等来实现化工园区有害气体的实时监测。可 通过按键设置报警值，当气体浓度超过设置值，系统会点亮发光二极管和导通蜂鸣器报警，同时，通过传输模块SIM800A向 指定手机发送报警短信，且LCD1602显示器会显示当前环境下所监测气体浓度值和设定的报警值，直观明了，能有效的实时 监测CO、SO 的浓度，减少事故的发生。 2 关键词:CO；SO ；AT89C51单片机；传输模块2 中图分类号：TP274 文献标志码:A 文章编号:1003-7241(2019)10-0115-05 Design of Harmful Gas Concentration Monitoring System in Chemical Industrial Park FURui-ling,XIAKai-lin,WANGYin-ling ( Huanghe S T College, Zhengzhou 450063 China ) Abstract:Chemical Industrial Park, which contains harmful gases such as CO and SO2, is an important hazard source in chemical in- dustry park. When the concentration of harmful gas is too high, it will cause major safety accidents and endangers person- al safety. The research and development of gas concentration monitoring instrument in Chemical Industrial Park is always a concern.This research is based on AT89C51 MCU as the core, using the gas sensor MQ-7 and MQ-135, ADC0809 ana- log to digital converter, transmission module to realize the real-time monitoring of toxic gas in the chemical industry park. The design can set the alarm value through the key. When the gas concentration exceeds the set value, the system lights the light emitting diode and the buzzer alarm. At the same time, the transmission module sends the alarm message to the