pim安装先阅读本文ptc creo 0.pdfVIP

READ THIS FIRST ® ® PTC Creo Expert Moldbase Extension 8.0 Import stallation and Usage Information Directory of Online and DVD Information Technical Support /support/index.htm EMX Resource Center /product/creo/expert-moldbase-extension Knowledge Base /support/index Reference s /appserver/cs/doc/refdoc.jsp Installation Instructions To install Creo Expert Moldbase Extension (EMX) 8.0 on a Windows tform, complete the following steps: 1. Insert the EMX 8.0 DVD into your DVD drive. The PTC Installation Assistant starts automatically. If the installer does not start, browse to the DVD and double-click setup.exe. 2. When the e screen appears, click Next accepting the default task Install new software. 3. Read through the software license agreement. Check I accept the license agreement and then click Next. 4. Change the destination folder or click Customize to select the optional language feature if it is required. 5. Click Install. ® 6. To start EMX with Creo Elements/Pro 5.0 or Creo Parametric, copy the files and config.win from the corresponding EMX_loadpoint\b reo2(wildfirex)subdirectory into your working directory. (For example, c:\ptc \EMX8 \b reo2) Be careful not to overwrite any existing configuration files that you want to keep. 7. (Optional) To append the options needed by EMX 8.0 to your custom file, copy the content of EMX_loadpoint\b reo2(wi