一种共振型超声椭圆振动超精密刀架的设计分析.docxVIP

一种共振型超声椭圆振动超精密刀架的设计分析 Abstract In this paper, a resonant ultrasonic elliptical vibration super- precision knife holder is designed and analyzed. The knife holder uses an elliptical vibration mode to achieve high precision cutting performance. The resonant frequency of the knife holder is carefully selected to match the frequency of the ultrasonic transducer, which leads to efficient energy transfer and a stable vibration state. The design is optimized by performing finite element analysis and experimental verification. The results show that the knife holder has good stability, high precision and high efficiency. Introduction Ultrasonic machining is an important non-traditional machining method that uses ultrasonic vibrations as a cutting tool. Compared with traditional machining methods, ultrasonic machining has the advantages of high processing precision, low tool wear, and no thermal damage to the workpiece. However, due to the limitations of the ultrasonic transducer and tool holder structure, the machining accuracy of ultrasonic machining is still limited. Therefore, how to improve the precision and stability of ultrasonic machining has become an important research topic. In recent years, researchers have proposed a variety of new ultrasonic machining methods to improve processing precision and stability. One of the most promising methods is to use a resonant ultrasonic elliptical vibration super-precision knife holder. This method utilizes the characteristics of elliptical vibration to achieve high-precision cutting performance. The elliptical vibration mode can effectively reduce the tool wear and improve the processing accuracy. However, due to the complex structure of the knife holder and the limited understanding of the vibration mechanism of the elliptical vibration mode, the design of the knife holder is still a challenge. In this paper, a resonant ultrasonic elliptical vibration super- precision knife holder is designed and analyzed. The main goal is to