电气毕业论文11篇：一种基于热阻抗模型的IGBT结温估计方法 .docVIP

电气毕业　11篇 内容提要： ? 一种基于热阻抗模型的IGBT结温估计方法 ? 方太高端厨电战略变革初见端倪 ? 电商征税对LED照明网店影响有多大？ ? 想改造智能家居照明 这9种是　选择 ? 一种公转加自转的旋转电镀方法 ? 珈伟光伏照明：拓展国内市场，做世界一流企业 ? “新能源发电技术”的教学思考与实践 ? 基于角色控制的异构数据展示在企业门户中的应用 ? 微型一体化井下电阻率探管的设计 ? 创新，新材料产业发展的关键驱动力 ? 乘性噪声干扰下的通信信号偏差控制器设计与研究 全文共37208 字 一种基于热阻抗模型的IGBT结温估计方法 　　摘 要：绝缘栅双极型晶体管（IGBT）在工业领域应用广泛，但IGBT结温易受工况变化及其所处散热环境影响，散热通道不畅会使IGBT模块处于高温状态，长期在高温状态下工作严重影响器件使用效率。由此，提出一种基于热阻抗模型的IGBT结温估计方法。将IGBT模块各功能层抽象为一个热阻模型，通过建模仿真获得某确定工况下IGBT的估计结温。在同工况下，通过实验采集IGBT温度值，将建模结果与实验结果相验证，进而证明基于阻抗模型的IGBT结温估计的准确性。 　　关键词:绝缘栅双极型晶体管;热阻模型;结温估计;建模仿真; 　　An IGBT Junction Temperature Estimation Method Based on the Thermal ImpedanceModel 　　LI Zhe LI Chengyuan YUAN Yuan CHEN Yujie WANG Ziman 　　Tianjin Research Institute of Electric science Co.,Ltd. 　　Abstract：Insulated gate bipolar transistor(IGBT)is widely used in the industry,but the IGBT junction temperature is easily affected by changes in operating conditions and the heat dissipation environment in which it is located. Poor heat dissipation channels will cause the IGBT module to remain in a high temperature state for a long time and it affects the efficiency of the device. So an IGBT junction temperature estimation method based on the thermal impedance model was proposed. Each functional layer of the IGBT module was abstracted as a thermal resistance model,the estimated junction temperature of the IGBT under certain conditions through the modeling and simulation was obtained. Under the same working conditions,the IGBT temperature was collected through experiments,the simulation results were verified with experiments,which prove the accuracy of IGBT junction temperature estimation based on impedance model. 　　Keyword：insulated gate bipolar transistor(IGBT); thermal resistance model; junction temperature estimation; modeling and simulation; 　　绝缘栅双极型晶体管（insulated gate bipolar transistor,IGBT）因具备较宽的工作电压范围和大电流的处理能力等优势，在能源发电、电动汽车等领域已得到广泛应用[1]。IGBT作为工业领域最为普遍使用的半导体器件，其功率管的稳定运行对于工业生产尤为重要，因此对于IGBT温度的把控更是重中之重[2]。只有IGBT的结温低于Tjmax(Tjmax为I