计算机网络英文题库chapter5.docxVIP

Chapter 5 The Link Layer and Local Area Network 1．A ( ) protocol is used to move a datagram over an individual link. A application-layer B transport-layer C network-layer D link-layer The units of data exchanged by a link-layer protocol are called ( ). A datagrams B frames C segments D messages Which of the following protocols is not a link-layer protocol? ( ) A Ethernet B PPP HDLC IP In the following four descriptions, which one is not correct? ( ) link-layer protocol has the node-to-node job of moving network-layer datagrams over a single link in the path. The services provided by the link-layer protocols may be different. A datagram must be handled by the same link-layer protocols on the different links in the path. The actions taken by a link-layer protocol when sending and receiving frames include error detection, flow control and random access. Which of the following services can not offered by a link-layer protocol? ( ) A congestion control B Link Access C Error control D Framing 6．( ) protocol serves to coordinate the frame transmissions of the many nodes when multiple nodes share a single broadcast link. A ARP MAC ICMP DNS In the following four descriptions about the adapter, which one is not correct? ( ) A The adapter is also called as NIC. The adapter is a semi-autonomous unit. The main components of an adapter are bus interface and the link interface. D The adapter can provide all the link-layer services. Consider CRC error checking approach, the four bit generator G is 1011, and suppose that the data D is then the value of R is( ). A 010 B 100 C 011 D 110 In the following four descriptions about random access protocol, which one is not correct? ( ) In slotted ALOHA, nodes can transmit at random time. In pure ALOHA, if a frame experiences a collision, the node will immediately retransmit it with probability p. The maximum efficiency of a slotted ALOHA is higher than a pure ALOHA. D In CSMA/CD, one node listens to the channel before transmitting