美国加州OBD标准-section1968-2-2016年修订.pdfVIP

OAL-approved: July 25, 2016 Contents (a) Purpose. 3 (b) Applicability. 3 (c) Definitions. 3 (d) General Requirements. 16 (1) The OBD II System. 16 (2) MIL and Fault Code Requirements. 16 (3) Monitoring Conditions. 22 (4) In-Use Monitor Performance Ratio Definition. 24 (5) Standardized tracking and reporting of monitor performance. 32 (6) Malfunction Criteria Determination and Adjustment Factors for Diesel Vehicles. 35 (7) Determination of Requirements for Applicable Vehicles. 38 (8) Enforcement Testing. 39 (9) Exceptions to General Requirements. 39 (e) Monitoring Requirements for Gasoline/Spark-Ignited Engines. 39 (1) Catalyst Monitoring 40 (2) Heated Catalyst Monitoring 43 (3) Misfire Monitoring 44 (4) Evaporative System Monitoring 52 (5) Secondary Air System Monitoring 56 (6) Fuel System Monitoring 58 (7) Exhaust Gas Sensor Monitoring 62 (8) Exhaust Gas Recirculation (EGR) System Monitoring 67 (9) Positive Crankcase Ventilation (PCV) System Monitoring 68 (10) Engine Cooling System Monitoring 70 (11) Cold Start Emission Reduction Strategy Monitoring 76 (12) Air Conditioning (A/C) System Component Monitoring 77 (13) Variable Valve Timing, Lift, and/or Control (VVT) System Monitoring 78 (14) Direct Ozone Reduction (DOR) System Monitoring 80 (15) Comprehensive Component Monitoring 81 (16) Other Emission Control or Source System Monitoring 93 (17) Exceptions to Monitoring Requirements 94 (f) Monitoring Requirements for Diesel/Compression-Ignition Engines. 99 (1) Non-Meth