内蒙古潮格旗炭窑口三号矿体硫化铜矿(20万吨年)开采方案初步设计.docVIP

本科生毕业设计说明书（毕业论文） 题 目：内蒙古潮格旗炭窑口三号矿体硫化铜矿（20万吨/年）开采方案初步设计 摘 要 本次设计为内蒙古潮格旗炭窑口三号矿体硫化铜矿（20万吨/年）开采方案初步设计，设计年生产能力为20万吨，服务年限为年。本设计主要内容包括开拓方案的选择比较、采矿方法的设计、通风系统的设计及提升与运输系统的设计等。本矿采用下盘竖井开拓，在0-14号勘探线之间设计矿块。采矿方法为垂直走向布置的水平深孔阶段矿房法，阶段高度为50米。一期开拓在6个阶段平面上进行巷道布置通风系统采用中央对角式通风，主井采用单罐笼提升，两个风井布置在矿体两翼的塌陷区外，作为安全出口。排水系统采用集中排水。此外，井筒断面尺寸、石门及巷道断面尺寸、电机车的选择、矿车的选择、提升设备的选择、通风设备的选择、排水设备的选择等相关内容也在设计中作了相关的叙述。 关键词：下盘竖井开拓；水平深孔阶段矿房法；中央对角式通风；Abstract The design of the flag of Mongolia tide grid Tanyaokou III copper sulfide ore (200,000 tons / year) preliminary design of mining plan, designed annual production capacity of 200,000 tons, the service life of 4 years. The open plan design of the main contents include the choice of comparison, the design of mining methods, ventilation system design and to enhance the design of transport systems. Footwall of the mine shaft development adopted in the design between exploration lines 0-14 nuggets. Mining method is arranged perpendicular to the horizontal hole stage stope method, stage height of 50 meters. A pioneering plane in six stages on roadway layout ventilation system with central diagonal ventilation, the main shaft with a single cage hoisting, two air shaft arranged in two wings of the collapse ore zone, as a safety outlet. Centralized drainage system drainage. In addition, the wellbore section size, Shimen and roadway size, the choice of motor vehicles, tub choice, the choice of lifting equipment, ventilation equipment selection, equipment selection drainage and other related content is also relevant to the design were described. Keywords: Under footwall of the vertical shafts development;Deep level stage stope method;Central diagonal ventilation 目 录 TOC \o 1-3 \h \z \u 摘 要 I Abstract II 第一章 矿区概况及地质特征 1 矿区概述 1 井田及其附近的地质特征 1 区域地质 1 地层 2 构造 2 地质发展史 2 矿产 2 矿区地质 3 地层、岩性对矿床的控制作用 3 构造与矿床的关系 3 火成岩 4 矿床分布及其认识 4 矿床地质特征 4 矿床顶底围岩 5 含矿层的划分及其变化 5 断裂构造及对矿床的影响 6 矿体产状、规模、形态及其变化特征 7 矿物共生组合及其结晶顺序 8