管道试压用盲板厚度计算.xlsVIP

Sheet3 Sheet2 Sheet1 (2) Sheet1 NPS (DN) TEST PRESSURE(Mpa) NOTE: 1) Above tabulated blind thickness shall be applied only for test blinds. (B) MATERIAL:SS400 SY=2,500kg/cm2 (T≤16) SY=2,400kg/cm2 (16＜T≤40) SY=2,200kg/cm2 (T＞40) Where T=required thickness(mm) B=inside diameter of gasket(mm) P=test pressure(kg/cm2g) SY=95% yield strength(kg/cm2) /movie/512.htm### 2) (A) EQUATION: T=B(3P/16SY)^1/2 仅为强度核算的数据，考虑到其稳定性，尽量采用对夹式盲板或在盲板上加十字型(#字型）钢背钢 尺寸 数量 厚度 材质 A335-P11 16 A53-B 10 8 形式 燕尾盲板 燕尾盲板 thickness (mm) of test blind/管线试压盲板厚度