补遗1 g第节木地板1部分概述.pdfVIP

SECTION 096400 WOOD FLOORING PART 1 GENERAL 1.1 RELATED S A. Drawings and general provisions of the Contract, luding General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section. 1.2 SUMMARY A. Section ludes: 1. Factory-finished wood flooring. 2. Field-finished wood flooring. 3. Sound control underlayment. 1.3 CONTRACTOR DESIGN RESPONSIBILITY A. Design Build responsibilities as defined within Section 013300 Submittal Procedures. 1.4 ACTION SUBMITTALS A. Product Data: For each type of product. B. Shop Drawings: For each type of floor assembly and accessory. lude ns, sections, and atta ent details. lude expansion provisions and trim details. C. Samples for Initial Selection: For each exposed product and for each color and texture specified, provide a minimum 300mm x 300mm size sample of same thickness and material indicated for the Work and showing the full range of normal color and texture variation pected. 1. lude Samples of accessories involving color and finish selection. D. Samples for Verification: For each type of wood flooring and accessory, with sta olor and finish required, provide 1200mm long and of same thickness and material indicated for the Work. lude 300mm x 300mm Sample sets showing the full range of expected aesthetic variations. 1.5 QUALITY ASSURANCE A. Manufacturer Qualifications: A qualified manufacturer that is certified for chain of custody by an FSC- accredited certification body. B. Vendor Qualifications: A vendor that