各部门安全生产目标责任书.docVIP

各部门安全生产目标责任书 2012年工程部安全生产目标责任书 一、 安全生产职责: 1、认真贯彻国家“安全第一，预防为主”的安全生产方针，深化安全生产的“双基”工作。 2、严格遵守国家及各级政府、主管部门制定的安全生产法律、法规，定期进行检查总结。 3、作为公司安全工作的主管部门，认真履行在日常工作中的监督、检查职责，为公司在安全方面的决策提供技术支持。 4、根据公司发展的需要，适时制定、完善安全管理制度。 5、认真组织在建项目安全检查工作，及时发现和消除安全隐患;采取积极措施督促、跟踪抽查安全隐患的整改工作。 6、积极开展安全宣传教育培训工作，全面提高在建项目施工人员的安全意识。 二、目标: 1、安全生产零事故,杜绝一次经济损失1000万元以上的各类责任事故。 2、事故隐患整改率100%。 3、重大危险源按要求辨识和控制率100%。 4、施工单位特种人员培训率100%。 5、安全设施设备完好率100%。 6、职业病发生率零。 box before commissioning, check distribution box there is no debris, installation in accordance with the criteria of quality assessment, chromatography, plates are complete. 2 boxes inside the doors and frames, and grounded or neutral examination. 3 with electric opening doors, door and frame ground terminal applying bare braided copper wire connections and grounding identifies. 4 connection of the protective conductor should be exposed in the external protective conductor Terminal. 5 lighting should be setting the zero line box (n) and protective ground (PE) bus, zero line and protect the ground bus distribution. 6 laid ground lines along the length of every 15-100mm respectively, coated with yellow and green stripes. 7 testing grounding resistance of grounding devices must comply with the design requirements. 8 boxes of checks: based on changes of design drawings and construction documents, check box in the component specification, model, installation location should be correct; boxes on both sides of the Terminal cannot lack; the conductor cross section should meet the requirements of drawings; line-by-line check box in the devices connection and the connection of the equipment to the terminal block inside the box. 9 box tie cable check: liaison between the box and the box cables required by proofing; check lines on the circuit at the same time should check the wires, cables, relays, switches, buttons, terminal blocks marked with line drawings. 10 operator checks: the main check 7、劳保用品合格使用率100%。 8、新改扩建项目“三同时”实现率100%。 三、奖惩办法: 1、年内公司将对以