冲压发动机燃料供给系统的控制研究的中期报告.docxVIP

冲压发动机燃料供给系统的控制研究的中期报告 摘要 本文介绍了针对冲压发动机燃料供给系统的控制研究的中期报告。通过对冲压发动机的燃烧特性、燃油喷射过程、燃油压力控制等方面的分析，提出了一种基于模型预测控制（MPC）的燃料供给系统控制方法。首先，建立了冲压发动机的燃油供给模型，通过实验验证了该模型的准确性。然后，针对燃油喷射过程中的问题，设计了一种新型的闭环控制策略，并通过实验验证了其优异的控制效果。最后，使用Simulink和MATLAB软件对整个控制系统进行了模拟，并通过实验验证了该控制系统的有效性。 关键词：冲压发动机；燃料供给系统；模型预测控制；燃油喷射；闭环控制 Abstract This paper presents a mid-term report on the control research of the fuel supply system for the stamping engine. Through the analysis of the combustion characteristics, fuel injection process, fuel pressure control and other aspects of the stamping engine, a fuel supply system control method based on model predictive control (MPC) is proposed. Firstly, the fuel supply model of the stamping engine is established, and the accuracy of the model is verified by experiments. Then, a new closed-loop control strategy is designed for the problems in the fuel injection process, and its excellent control effect is verified by experiments. Finally, the entire control system is simulated using Simulink and MATLAB software, and the effectiveness of the control system is verified by experiments. Keywords: Stamping engine; fuel supply system; model predictive control; fuel injection; closed-loop control