Danfoss丹佛斯ICS SV15-34-02 Technical Information 用户指南.pdf

ENGINEERING Solenoid Valves Technical Information 本 | TONMORROW 4Way, 3 Position Spool SV15-34-02 OPERATION SolenoidValve, SpoolType, 3-Position,4-Way, High Flow (15-Sizej. When de-energized,the SV15-34-02isclosed center blockingallflow. WhencoilS1isenergized,thespoolshiftstoallowflowfromport3toport4,andfromport2to1.When coil52isenergized,the spoolshiftsto allowflowfrom port3to port 2 andfrom port4to port1. Followthe“Operating Envelopelimitsto ensure shifting ofthevalveduring operation. Thisvalveisa directreplacementforEDH 12/4306and usesa metric M33x2 cavity (NCS 12/4) for high flow capability. The SV15-34-02 comes standard with a one-directiom,， push-pin manual override. When the manual override is pushed, the spool shifts followingthe logicof energizing 52. APPLICATIONS These valves are primarily used in mobile and industrial applications for controlling the direction of the flow in a circuit，Spool valves will have some leakage que to spool clearance, so 和 fyour application requires no leakage at the working port(s) apply a low leakage poppetvalve(sj,like PO checkvalvye,counterbalancevalve etc,inadditiontothis solenoid valve. Use the optional screen to help protectthe actuator from large particles. This valve comes standard with a manual override {one-direction, push-pin style), This valve can operate with an inlet pressure of 315 bar on port 3 for 300,000 cycles. Port 1 is not intended for use as inlet (Tank only)， SPECIFICATIONS SCHEMATIC Rated Pressure* Maximum Rated Flow at 7 bar [100 psi] i No Filter Filter Weightincluding coil 。 。 @ 人 蔬 Q 思 Cavity Coil M19 33 Watt W 并- 工 Diode (Optional) Unidirectional 由 | 六 HS , “Rated Pressure based on NFPA fatigue test standards (at 1 Million Cycles). 习 | 51 See 315 bar pressure rating note on page 10. 四 9 四 中 PERFORMANCE CURVES Pressure Drop Operating envelope