康明斯L10 M11发动机维修手册 英文版.pdfVIP

Alternative Repair Manual L10 and M11 Series Engines Copyright 1995 Bulletin No. 3810310-01 Cummins Engine Company, Inc. Printed 7/95 All rights reserved Foreword This alternative repair manual contains specifications and instructions for repairing damaged or worn components. The repair procedures are based on the engine being repaired with approved machining and grinding equipment. Some procedures require the use of special service tools. Make sure the correct tools and equipment are used as described in the procedures. Read and follow all safety instructions. Refer to the WARNING in the General Safety Instructions in Section i - Introduction. When a specific brand name, number, or special tool is referenced in this manual, an equivalent product can be used in place of the recommended item. A series of specific service manuals (for example: Shop, Troubleshooting and Repair, and Specifications) are available and can be ordered by filling out and mailing the Literature Order Form located in Section L - Service Literature. Cummins Engine Company, Inc. encourages the user of this manual to report errors, omissions, and recommen- dations for improvement. Please use the postage paid, pre-addressed Literature Survey Form in the back of this manual for communicating your comments. The specifications and rebuild information in this manual is based on the information in effect at the time of printing. Cummins Engine Company, Inc. reserves the right to make any changes at any time without obligation. If differences are found between your engine and the information in this manual, contact a Cummins Authorized Repair Location or call 1-800-DIESELS (1-800-343-7357