【英语版】国际标准 ISO 14419:2010 EN 纺织品 耐油性 耐碳氢化合物测试 Textiles — Oil repellency — Hydrocarbon resistance test.pdf
- 2
- 0
- 2024-07-20 发布于四川
-
正版发售
- 现行
- 正在执行有效期
- | 2010-02-25 颁布
- 1、本网站所提供的标准文本仅供个人学习、研究之用,未经授权,严禁复制、发行、汇编、翻译或网络传播等,侵权必究。
- 2、本网站所提供的标准均为PDF格式电子版文本(可阅读打印),因数字商品的特殊性,一经售出,不提供退换货服务。
- 3、标准文档要求电子版与印刷版保持一致,所以下载的文档中可能包含空白页,非文档质量问题
查看更多
ISO14419:2010ENTextiles—Oilrepellency—Hydrocarbonresistancetest是纺织品防油性能的碳氢化合物抵抗性测试的标准。
这个标准用于评估纺织品对油污的抵抗能力,即它们能否有效防止油污的渗透和扩散。标准测试方法是通过模拟油性污渍喷涂在纺织品上,然后通过一定的时间和温度条件,观察和测量污渍在纺织品上的扩散程度。如果扩散程度较小,说明该纺织品具有较好的防油性能。
测试过程中使用的碳氢化合物模拟油污,包括矿物油、润滑油、润滑脂等常见油污类型。测试条件包括喷涂量、温度、时间等参数,以确保测试结果的准确性和可靠性。
这个标准对于纺织品生产商和消费者都具有重要意义,因为它可以帮助生产商评估产品的防油性能,从而保证产品的质量和可靠性,同时也可以帮助消费者选择具有较好防油性能的纺织品,从而更好地保护自己的衣物和健康。
您可能关注的文档
- 国际标准 ISO 14389:2022 EN Textiles — Determination of the phthalate content — Tetrahydrofuran method 纺织品 邻苯二甲酸酯含量的测定 四氢呋喃法.pdf
- 国际标准 ISO 14396:2002 EN 往复式内燃机 发动机功率的测定和测量方法 根据 ISO 8178 进行废气排放测试的附加要求 Reciprocating internal combustion engines — Determination and method for the measurement of engine power — Additional requirements for exhaust emission tests in accordance wit.pdf
- 国际标准 ISO 14396:2002 EN Reciprocating internal combustion engines — Determination and method for the measurement of engine power — Additional requirements for exhaust emission tests in accordance with ISO 8178 往复式内燃机 发动机功率的测定和测量方法 根据 ISO 8178 进行废.pdf
- 国际标准 ISO 14397-1:2007 EN 土方机械 装载机和挖掘装载机 第1部分:额定工作能力的计算和核实计算倾卸载荷的试验方法 Earth-moving machinery — Loaders and backhoe loaders — Part 1: Calculation of rated operating capacity and test method for verifying calculated tipping load.pdf
- 国际标准 ISO 14397-1:2007 EN Earth-moving machinery — Loaders and backhoe loaders — Part 1: Calculation of rated operating capacity and test method for verifying calculated tipping load 土方机械 装载机和挖掘装载机 第1部分:额定工作能力的计算和核实计算倾卸载荷的试验方法.pdf
- 国际标准 ISO 14397-1:2007/AMD 1:2019 EN 土方机械 装载机和挖掘装载机 第1部分:额定工作能力的计算和核实计算倾卸载荷的试验方法 修正案1 Earth-moving machinery — Loaders and backhoe loaders — Part 1: Calculation of rated operating capacity and test method for verifying calculated tipping load — A.pdf
- 国际标准 ISO 14397-1:2007/AMD 1:2019 EN Earth-moving machinery — Loaders and backhoe loaders — Part 1: Calculation of rated operating capacity and test method for verifying calculated tipping load — Amendment 1 土方机械 装载机和挖掘装载机 第1部分:额定工作能力的计算和核实计算倾卸载荷.pdf
- 国际标准 ISO 14397-2:2007 EN 土方机械 装载机和挖掘装载机 第2部分:测量突破力和提升至最大提升高度的能力的测试方法 Earth-moving machinery — Loaders and backhoe loaders — Part 2: Test method for measuring breakout forces and lift capacity to maximum lift height.pdf
- 国际标准 ISO 14397-2:2007 EN Earth-moving machinery — Loaders and backhoe loaders — Part 2: Test method for measuring breakout forces and lift capacity to maximum lift height 土方机械 装载机和挖掘装载机 第2部分:测量突破力和提升至最大提升高度的能力的测试方法.pdf
- 国际标准 ISO 14400:2021 EN 公路车辆 车轮和轮辋 使用、一般维护和安全要求以及停用条件 Road vehicles — Wheels and rims — Use, general maintenance and safety requirements and out-of-service conditions.pdf
- 国际标准 ISO 14419:2010 EN Textiles — Oil repellency — Hydrocarbon resistance test 纺织品 耐油性 耐碳氢化合物测试.pdf
- 国际标准 ISO 1442:2023 EN 肉和肉制品 水分含量的测定 参考方法 Meat and meat products — Determination of moisture content — Reference method.pdf
- 国际标准 ISO 1442:2023 EN Meat and meat products — Determination of moisture content — Reference method 肉和肉制品 水分含量的测定 参考方法.pdf
- 国际标准 ISO 14420:2020 EN 用于铝生产的碳质产品 焙烧阳极和成型碳质产品 线性热膨胀系数的测定 Carbonaceous products for the production of aluminium — Baked anodes and shaped carbon products — Determination of the coefficient of linear thermal expansion.pdf
- 国际标准 ISO 14420:2020 EN Carbonaceous products for the production of aluminium — Baked anodes and shaped carbon products — Determination of the coefficient of linear thermal expansion 用于铝生产的碳质产品 焙烧阳极和成型碳质产品 线性热膨胀系数的测定.pdf
- 国际标准 ISO 14422:1999 EN 铝生产中使用的碳质材料 冷压浆料 取样方法 Carbonaceous materials used in the production of aluminium — Cold-ramming pastes — Methods of sampling.pdf
- 国际标准 ISO 14422:1999 EN Carbonaceous materials used in the production of aluminium — Cold-ramming pastes — Methods of sampling 铝生产中使用的碳质材料 冷压浆料 取样方法.pdf
- 国际标准 ISO 14427:2004 EN 铝生产中使用的碳质材料 冷压浆和温压浆 制备未烘烤试样和测定压实后的表观密度 Carbonaceous materials used in the production of aluminium — Cold and tepid ramming pastes — Preparation of unbaked test specimens and determination of apparent density after compacti.pdf
- 国际标准 ISO 14427:2004 EN Carbonaceous materials used in the production of aluminium — Cold and tepid ramming pastes — Preparation of unbaked test specimens and determination of apparent density after compaction 铝生产中使用的碳质材料 冷压浆和温压浆 制备未烘烤试样和测定压实后的表观.pdf
- 国际标准 ISO 14428:2019 EN 用于生产铝的碳质材料 冷压浆和温压浆 烘烤过程中的膨胀/收缩 Carbonaceous materials for the production of aluminium — Cold and tepid ramming pastes — Expansion/shrinkage during baking.pdf
文档评论(0)