【英语版】国际标准 ISO 16017-1:2000 EN Indoor, ambient and workplace air — Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography — Part 1: Pumped sampling 室内、环境和工作场所空气 利用吸附管/热脱附/毛细管气相色谱法采样和分析挥发性有机化.pdf
- 9
- 0
- 2024-07-21 发布于四川
-
正版发售
- 现行
- 正在执行有效期
- | 2000-11-23 颁布
ISO16017-1:2000EN《室内、环境和工作场所空气——用吸附管/热脱附/毛细管气相色谱法对挥发性有机化合物进行采样与分析》——部分1:抽吸式采样
该标准规定了用于采样和分析挥发性有机化合物的标准方法,特别适用于对吸附管/热脱附/毛细管气相色谱技术中使用的室内、环境和工作场所空气中的挥发性有机化合物进行采样和分析。这种方法被广泛应用于环境和健康领域的研究,以便评估和改善室内空气质量。
该标准的主要组成部分包括:
1.采样设备的选择和准备:根据待测挥发性有机化合物的性质和浓度,选择合适的吸附管和采样设备。
2.采样过程:包括吸附管放置、抽吸速度控制、采样时间等关键步骤,以确保能够有效地从空气中捕获挥发性有机化合物。
3.样品处理:在采样结束后,对吸附管进行加热脱附,将挥发性有机化合物转移到气相色谱进行分析。
4.色谱分析:使用毛细管气相色谱技术对脱附后的样品进行分析,以确定各种挥发性有机化合物的浓度和组成。
该标准提供了详细的操作指南和质量控制措施,以确保分析结果的准确性和可靠性。该标准还规定了数据解读和报告的规范,以确保信息的完整性和可读性。
ISO16017-1:2000EN标准提供了一种精确、可靠和通用的方法,用于采样和分析室内、环境和工作场所空气中的挥发性有机化合物,为研究和环境保护提供了重要的技术支持。
您可能关注的文档
- 国际标准 ISO 15970:2008 EN Natural gas — Measurement of properties — Volumetric properties: density, pressure, temperature and compression factor 天然气 性能测量 体积性能:密度、压力、温度和压缩系数.pdf
- 国际标准 ISO 15971:2008 EN 天然气 性能测量 热值和沃贝指数 Natural gas — Measurement of properties — Calorific value and Wobbe index.pdf
- 国际标准 ISO 15971:2008 EN Natural gas — Measurement of properties — Calorific value and Wobbe index 天然气 性能测量 热值和沃贝指数.pdf
- 国际标准 ISO 15973:2000 EN 封闭型抽芯铆钉 AlA/St Closed end blind rivets with break pull mandrel and protruding head — AlA/St.pdf
- 国际标准 ISO 15973:2000 EN Closed end blind rivets with break pull mandrel and protruding head — AlA/St 封闭型抽芯铆钉 AlA/St.pdf
- 国际标准 ISO 15974:2000 EN 封闭型沉头抽芯铆钉 AlA/St Closed end blind rivets with break pull mandrel and countersunk head — AlA/St.pdf
- 国际标准 ISO 15974:2000 EN Closed end blind rivets with break pull mandrel and countersunk head — AlA/St 封闭型沉头抽芯铆钉 AlA/St.pdf
- 国际标准 ISO 15975:2002 EN 带拉断芯轴和突出头部的封闭型抽芯铆钉 AI/AIA Closed end blind rivets with break pull mandrel and protruding head — AI/AIA.pdf
- 国际标准 ISO 15975:2002 EN Closed end blind rivets with break pull mandrel and protruding head — AI/AIA 带拉断芯轴和突出头部的封闭型抽芯铆钉 AI/AIA.pdf
- 国际标准 ISO 15976:2002 EN 封闭型抽芯铆钉(带拉断芯轴和突出头部) St/St Closed end blind rivets with break pull mandrel and protruding head — St/St.pdf
- 国际标准 ISO 16017-2:2003 EN 室内、环境和工作场所空气 利用吸附管/热解吸附/毛细管气相色谱法对挥发性有机化合物进行采样和分析 第2部分:扩散采样 Indoor, ambient and workplace air — Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography — Part 2:.pdf
- 国际标准 ISO 16017-2:2003 EN Indoor, ambient and workplace air — Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography — Part 2: Diffusive sampling 室内、环境和工作场所空气 利用吸附管/热解吸附/毛细管气相色谱法对挥发性有机化.pdf
- 国际标准 ISO 16020:2005 EN/FR 混凝土加固和预应力用钢 词汇表 Steel for the reinforcement and prestressing of concrete — Vocabulary.pdf
- 国际标准 ISO 16020:2005 EN/FR Steel for the reinforcement and prestressing of concrete — Vocabulary 混凝土加固和预应力用钢 词汇表.pdf
- 国际标准 ISO 16021:2024 EN 尿便一次性使用尿失禁产品——用户与照护者视角一次性成人用品评估的基本原则 Absorbent incontinence products for urine and/or faeces — Basic principles for evaluation of single-use adult products from the perspective of users and caregivers.pdf
- 国际标准 ISO 16021:2024 EN Absorbent incontinence products for urine and/or faeces — Basic principles for evaluation of single-use adult products from the perspective of users and caregivers 尿便一次性使用尿失禁产品——用户与照护者视角一次性成人用品评估的基本原则.pdf
- 国际标准 ISO 16024:2005 EN 防止高空坠落的个人防护设备 柔性水平救生索系统 Personal protective equipment for protection against falls from a height — Flexible horizontal lifeline systems.pdf
- 国际标准 ISO 16024:2005 EN Personal protective equipment for protection against falls from a height — Flexible horizontal lifeline systems 防止高空坠落的个人防护设备 柔性水平救生索系统.pdf
- 国际标准 ISO 16028:2023 EN 液压流体动力 平装式快速接头的尺寸和要求 Hydraulic fluid power — Dimensions and requirements of quick-action couplings, flush-face type.pdf
- 国际标准 ISO 16028:2023 EN Hydraulic fluid power — Dimensions and requirements of quick-action couplings, flush-face type 液压流体动力 平装式快速接头的尺寸和要求.pdf
最近下载
- 智能马桶使用说明书智能马桶使用说明书.doc VIP
- 02S403《钢制管件》《钢制管件》.docx VIP
- 高速公路洞施工方案.doc VIP
- L360QS管线钢环焊缝在湿硫化氢中损伤行为的研究.pdf VIP
- DB53_T 1447.3-2025 公路工程施工安全风险分级管控和隐患排查治理双重预防体系建设指南 第3部分:桥梁工程.docx VIP
- 浅析分布式电源并网的潮流计算.pdf VIP
- 《先进制造技术》教案 第2课 现代设计技术(一).pdf VIP
- DB53_T 1444-2025 澜湄流域架空导线产品包装技术规范.docx VIP
- 春节喜庆家宴.pdf
- DB42_T 2451-2025 湖北省渡槽安全鉴定规程.pdf VIP
原创力文档

文档评论(0)