【英语版】国际标准 ISO 20320:2020 EN Protective clothing for use in snowboarding — Wrist protectors — Requirements and test methods 滑雪板运动中使用的防护服 护腕 要求和测试方法.pdf
- 5
- 0
- 2024-07-24 发布于四川
-
正版发售
- 现行
- 正在执行有效期
- | 2020-03-25 颁布
ISO20320:2020是关于用于滑雪的防护服装中的护腕的相关标准。该标准主要涉及以下内容:
*防护腕部保护服的要求和测试方法。
下面我们将对标准中的主要内容进行详细解释:
**适用范围**:
此标准规定了滑雪用护腕的规范,特别是对于如何设计,制造和测试以保护手腕免受运动伤害的护腕有详细的指导。
**一般要求**:
*护腕的材料应具备足够的强度和耐用性,同时不能对穿戴者的皮肤产生过度的刺激或不适。
*护腕的设计应考虑保护手腕的同时,不会影响滑雪者的正常动作。
*护腕应配备适当的固定装置,以确保其在滑雪过程中不会脱落或移位。
*护腕的颜色或标记应清晰可见,以便在滑雪过程中被其他滑雪者识别。
**测试方法**:
*对护腕进行物理和化学测试以确保其符合上述要求。
*评估护腕对皮肤的刺激程度,以确保其对皮肤无害。
*测试护腕在滑雪过程中的稳定性,以确保其能在各种条件下保持稳定。
*测试护腕在雪地中的抗冲击性能,以确保其对滑雪者的手腕有足够的保护。
ISO20320:2020标准为滑雪者提供了关于如何选择和正确使用护腕的重要指导,以确保他们在享受滑雪乐趣的同时,也能得到足够的保护。
以上是对该标准内容的详细解释,希望对你有所帮助。
您可能关注的文档
- 国际标准 ISO 20289:2018 EN Surface chemical analysis — Total reflection X-ray fluorescence analysis of water 表面化学分析 水的全反射 X 射线荧光分析.pdf
- 国际标准 ISO 20290-1:2021 EN 混凝土骨料 机械和物理性能试验方法 第1部分:体积密度、颗粒密度、颗粒质量体积比和吸水率的测定 Aggregates for concrete — Test methods for mechanical and physical properties — Part 1: Determination of bulk density, particle density, particle mass-per-volume and water .pdf
- 国际标准 ISO 20290-1:2021 EN Aggregates for concrete — Test methods for mechanical and physical properties — Part 1: Determination of bulk density, particle density, particle mass-per-volume and water absorption 混凝土骨料 机械和物理性能试验方法 第1部分:体积密度、颗粒密度、颗粒质量.pdf
- 国际标准 ISO 20290-2:2019 EN 混凝土骨料 机械和物理特性试验方法 第2部分:通过洛杉矶试验(LA-Test)确定抗破碎性的方法 Aggregates for concrete — Test methods for mechanical and physical properties — Part 2: Method for determination of resistance to fragmentation by Los Angeles Test (LA-Tes.pdf
- 国际标准 ISO 20290-2:2019 EN Aggregates for concrete — Test methods for mechanical and physical properties — Part 2: Method for determination of resistance to fragmentation by Los Angeles Test (LA-Test) 混凝土骨料 机械和物理特性试验方法 第2部分:通过洛杉矶试验(LA-Test)确定抗破碎性的.pdf
- 国际标准 ISO 20290-3:2019 EN 混凝土骨料 机械和物理性能试验方法 第3部分:骨料压碎值(ACV)的测定 Aggregates for concrete — Test methods for mechanical and physical properties — Part 3: Determination of aggregate crushing value (ACV).pdf
- 国际标准 ISO 20290-3:2019 EN Aggregates for concrete — Test methods for mechanical and physical properties — Part 3: Determination of aggregate crushing value (ACV) 混凝土骨料 机械和物理性能试验方法 第3部分:骨料压碎值(ACV)的测定.pdf
- 国际标准 ISO 20290-4:2019 EN 混凝土骨料 机械和物理性能测试方法 第4部分:10% 细粒值(TFV)的测定 Aggregates for concrete — Test methods for mechanical and physical properties — Part 4: Determination of ten percent fines value (TFV).pdf
- 国际标准 ISO 20290-4:2019 EN Aggregates for concrete — Test methods for mechanical and physical properties — Part 4: Determination of ten percent fines value (TFV) 混凝土骨料 机械和物理性能测试方法 第4部分:10% 细粒值(TFV)的测定.pdf
- 国际标准 ISO 20290-5:2023 EN 混凝土骨料 机械和物理特性试验方法 第5部分:筛分法确定粒度分布 Aggregates for concrete — Test methods for mechanical and physical properties — Part 5: Determination of particle size distribution by sieving method.pdf
- 国际标准 ISO 20321:2020 EN 石油、石化和天然气工业 机械安全 动力电梯 Petroleum, petrochemical and natural gas industries — Safety of machineries — Powered elevators.pdf
- 国际标准 ISO 20321:2020 EN Petroleum, petrochemical and natural gas industries — Safety of machineries — Powered elevators 石油、石化和天然气工业 机械安全 动力电梯.pdf
- 国际标准 ISO 20323:2018 EN 精细陶瓷(先进陶瓷、先进技术陶瓷) 陶瓷复合材料在常温常压下的机械性能 确定管材的拉伸性能 Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure — Determination .pdf
- 国际标准 ISO 20323:2018 EN Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure — Determination of tensile properties of tubes 精细陶瓷(先进陶瓷、先进技术陶.pdf
- 国际标准 ISO 20326:2016 EN 弹性地面铺装材料 地面面板/散铺组件规范 Resilient floor coverings — Specification for floor panels/assembly for loose laying.pdf
- 国际标准 ISO 20326:2016 EN Resilient floor coverings — Specification for floor panels/assembly for loose laying 弹性地面铺装材料 地面面板/散铺组件规范.pdf
- 国际标准 ISO 20326:2016/AMD 1:2020 EN 弹性楼板面层 用于松散铺设的楼板面板/组件规范 修订案 1:取决于基材的要求 Resilient floor coverings — Specification for floor panels/assembly for loose laying — Amendment 1: Requirements depending on the substrate.pdf
- 国际标准 ISO 20326:2016/AMD 1:2020 EN Resilient floor coverings — Specification for floor panels/assembly for loose laying — Amendment 1: Requirements depending on the substrate 弹性楼板面层 用于松散铺设的楼板面板/组件规范 修订案 1:取决于基材的要求.pdf
- 国际标准 ISO 20329:2020 EN 塑料 通过往复直线滑动运动确定磨料磨损情况 Plastics — Determination of abrasive wear by reciprocating linear sliding motion.pdf
- 国际标准 ISO 20329:2020 EN Plastics — Determination of abrasive wear by reciprocating linear sliding motion 塑料 通过往复直线滑动运动确定磨料磨损情况.pdf
最近下载
- 管理学经典文献之十八——架构性创新-现有产品技术的重组和在位企业的失败.pdf VIP
- 停车场规划设计规范 .pdf VIP
- 交通运输局党组书记2025年度民主生活会个人对照检查材料(五个带头).docx VIP
- 奔驰GLE说明书|Mercedes-Benz GLE Owner's Manual用户手册.pdf
- 常州晶昀新能源有限公司新建多晶硅片加工项目环评报告书.pdf VIP
- 2026年激光雷达成本下降趋势报告及未来五至十年自动驾驶配套报告.docx
- 技嘉 主板 Socket AM3+ GA-990FXA-UD5 R5 (rev. 1.0) 使用手册.pdf
- 计算机及外部设备装配调试员理论知识细目表-中级.pdf VIP
- 《中华人民共和国农产品质量安全法》培训与解读课件.pptx VIP
- 六年级上册科学全册知识点(新改版苏教版).doc VIP
原创力文档

文档评论(0)