【英语版】国际标准 ISO 11058:1999 EN Geotextiles and geotextile-related products — Determination of water permeability characteristics normal to the plane, without load 土工织物和土工织物相关产品 在不加载荷载的情况下,测定平面法线方向的透水性特征.pdf
- 0
- 0
- 2024-08-07 发布于四川
-
正版发售
- 废止
- 已被废除、停止使用,并不再更新修订
- | 1999-03-04 颁布
- 1、本网站所提供的标准文本仅供个人学习、研究之用,未经授权,严禁复制、发行、汇编、翻译或网络传播等,侵权必究。
- 2、本网站所提供的标准均为PDF格式电子版文本(可阅读打印),因数字商品的特殊性,一经售出,不提供退换货服务。
- 3、标准文档要求电子版与印刷版保持一致,所以下载的文档中可能包含空白页,非文档质量问题
查看更多
ISO11058:1999ENGeotextilesandgeotextile-relatedproducts—Determinationofwaterpermeabilitycharacteristicsnormaltotheplane,withoutload是关于土工织物和与土工织物相关的产品的一个国际标准。这个标准主要是用于确定土工织物在垂直于其平面方向上的透水性特性,即在无负荷条件下的透水性。这个标准规定了如何测量和计算土工织物的透水性,以评估它们在土壤工程中的应用性能。在进行这项测试时,通常需要使用特定的仪器和方法,以确保测试结果的准确性和可靠性。这个标准的目的是为了提供一个统一的测试方法,以便在不同的实验室和生产厂家之间进行比较和评估。在进行测试时,需要遵循标准的操作步骤和要求,以确保结果的准确性和可靠性。
您可能关注的文档
- 国际标准 ISO 1100-1:1981 EN 明渠液体流量测量 第1部分:测量站的建立和运行 Liquid flow measurement in open channels — Part 1: Establishment and operation of a gauging station.pdf
- 国际标准 ISO 1100-1:1981 EN Liquid flow measurement in open channels — Part 1: Establishment and operation of a gauging station 明渠液体流量测量 第1部分:测量站的建立和运行.pdf
- 国际标准 ISO 1100-1:1996 EN 明渠液体流量测量 第1部分:测量站的建立和运行 Measurement of liquid flow in open channels — Part 1: Establishment and operation of a gauging station.pdf
- 国际标准 ISO 1100-1:1996 EN Measurement of liquid flow in open channels — Part 1: Establishment and operation of a gauging station 明渠液体流量测量 第1部分:测量站的建立和运行.pdf
- 国际标准 ISO 11001-1:1993 EN 农用轮式拖拉机和机具 三点式铰接连接器 第1部分:U 型框架耦合器 Agricultural wheeled tractors and implements — Three-point hitch couplers — Part 1: U-frame coupler.pdf
- 国际标准 ISO 11001-1:1993 EN Agricultural wheeled tractors and implements — Three-point hitch couplers — Part 1: U-frame coupler 农用轮式拖拉机和机具 三点式铰接连接器 第1部分:U 型框架耦合器.pdf
- 国际标准 ISO 11001-3:1993 EN 农用轮式拖拉机和机具 三点式铰接耦合器 第3部分:连杆耦合器 Agricultural wheeled tractors and implements — Three-point hitch couplers — Part 3: Link coupler.pdf
- 国际标准 ISO 11001-3:1993 EN Agricultural wheeled tractors and implements — Three-point hitch couplers — Part 3: Link coupler 农用轮式拖拉机和机具 三点式铰接耦合器 第3部分:连杆耦合器.pdf
- 国际标准 ISO 1100-2:1998 EN 明渠中液体流量的测量 第2部分:确定阶段-排放关系 Measurement of liquid flow in open channels — Part 2: Determination of the stage-discharge relation.pdf
- 国际标准 ISO 1100-2:1998 EN Measurement of liquid flow in open channels — Part 2: Determination of the stage-discharge relation 明渠中液体流量的测量 第2部分:确定阶段-排放关系.pdf
- 国际标准 ISO 11058:2010 EN 土工织物和土工织物相关产品 在不加载荷载的情况下,测定平面法线方向的透水性特征 Geotextiles and geotextile-related products — Determination of water permeability characteristics normal to the plane, without load.pdf
- 国际标准 ISO 11058:2010 EN Geotextiles and geotextile-related products — Determination of water permeability characteristics normal to the plane, without load 土工织物和土工织物相关产品 在不加载荷载的情况下,测定平面法线方向的透水性特征.pdf
- 国际标准 ISO 1106-1:1984 EN 熔化焊接接头射线照相检查推荐做法 第1部分:厚度不超过 50 毫米的钢板熔焊对接接头 Recommended practice for radiographic examination of fusion welded joints — Part 1: Fusion welded butt joints in steel plates up to 50 mm thick.pdf
- 国际标准 ISO 1106-1:1984 EN Recommended practice for radiographic examination of fusion welded joints — Part 1: Fusion welded butt joints in steel plates up to 50 mm thick 熔化焊接接头射线照相检查推荐做法 第1部分:厚度不超过 50 毫米的钢板熔焊对接接头.pdf
- 国际标准 ISO 1106-2:1985 EN 熔化焊接接头射线照相检查推荐做法 第2部分:厚度大于 50 毫米、小于等于 200 毫米钢板的熔化焊接对接接头 Recommended practice for radiographic examination of fusion welded joints — Part 2: Fusion welded butt joints in steel plates thicker than 50 mm and up to and includ.pdf
- 国际标准 ISO 1106-2:1985 EN Recommended practice for radiographic examination of fusion welded joints — Part 2: Fusion welded butt joints in steel plates thicker than 50 mm and up to and including 200 mm in thickness 熔化焊接接头射线照相检查推荐做法 第2部分:厚度大于 50 毫米.pdf
- 国际标准 ISO 11063:2012 EN 土壤质量 从土壤样本中直接提取 DNA 的方法 Soil quality — Method to directly extract DNA from soil samples.pdf
- 国际标准 ISO 11063:2012 EN Soil quality — Method to directly extract DNA from soil samples 土壤质量 从土壤样本中直接提取 DNA 的方法.pdf
- 国际标准 ISO 11064-4:2004 EN 控制中心的人体工学设计 第4部分:工作站的布局和尺寸 Ergonomic design of control centres — Part 4: Layout and dimensions of workstations.pdf
- 国际标准 ISO 11064-4:2004 EN Ergonomic design of control centres — Part 4: Layout and dimensions of workstations 控制中心的人体工学设计 第4部分:工作站的布局和尺寸.pdf
文档评论(0)